Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

What size battery does a 2019 Honda key fob take?

Most 2019 Honda key fobs use a CR2032 3-volt coin cell. A few variations exist by model, so it's best to verify by inspecting the battery in your fob or consulting the owner's manual.


Common battery sizes for 2019 Honda key fobs


To guide replacements, here is a quick overview of typical sizes used across common 2019 Honda models. In practice, CR2032 is by far the most widely used size for these fobs.



  • Civic (2019): CR2032

  • Accord (2019): CR2032

  • CR‑V (2019): CR2032

  • Pilot (2019): CR2032

  • Odyssey (2019): CR2032


Note: If your fob isn’t CR2032, check the imprint on the old battery or the manual for the exact size. Some models may use CR2025 in older designs or limited trims.


How to replace the battery in a 2019 Honda key fob


Replacing a key fob battery is straightforward in most 2019 Honda models. The steps below describe a typical CR2032 replacement. If your fob design differs, refer to your manual.



  1. Locate the release or remove the mechanical key blade. On many fobs, slide a small switch or press a button to eject the emergency key, then pull it out.

  2. Use a small flat tool or a coin to gently pry apart the two halves of the key fob. Work around the seam to avoid damaging the case.

  3. Remove the old battery and note the orientation (which side is facing up). In most cases, the plus (+) side faces up.

  4. Insert a new CR2032 battery with the correct orientation, ensuring it sits flat and makes good contact with the terminals.

  5. Reassemble the fob halves and reinsert the mechanical key blade if used.

  6. Test the fob by locking/unlocking your vehicle and using the panic button to ensure full function. If it fails, the issue may be the button contact or internal electronics and may require service.


After changing the battery, the fob should respond immediately. If not, ensure the battery is new and correctly oriented, and consider reprogramming or checking for corrosion or damaged wiring.


Summary


The 2019 Honda key fob generally uses a CR2032 3-volt coin battery. Verify the exact size by inspecting the battery or consulting the manual. Replacing the battery is simple and can restore key fob function in minutes; if problems persist, contact a dealer or locksmith for assistance.

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.