The standard lug nuts for a 2016 Toyota Corolla are M12 x 1.5 with a 60-degree conical seating surface, used on the factory 5x100 wheels. They typically require a 19 mm socket and are torqued to about 103 newton-meters (76 foot-pounds).
In more detail, these lug nuts secure the Corolla’s wheels to the hub via a 5-lug pattern and are designed to match the factory wheel hardware. While this size covers the majority of 2016 Corolla models, variations can occur with different trims, wheel options, or aftermarket parts. Always verify lug nut size and torque in the owner's manual or with a qualified technician if you’ve installed new wheels or are using accessories.
Key lug nut specifications for the 2016 Corolla
Below is a quick reference to the main technical specs you’ll need when selecting or inspecting lug nuts for a 2016 Corolla. The details apply to most factory configurations, but aftermarket setups can differ.
- Thread size: M12 x 1.5
- Seat type: 60-degree conical seat
- Hex size: 19 mm
- Bolt pattern: 5x100 mm
- Recommended torque: ~103 Nm (76 ft-lbs)
These specifications cover the standard 2016 Corolla wheel setup. If you have aftermarket wheels, hub-centric rings, or spacers, confirm the correct seat type, thread size, and torque with the wheel manufacturer or a certified mechanic.
Summary
For a 2016 Toyota Corolla, expect lug nuts that are M12x1.5 with a 60-degree conical seat, a 19 mm hex size, and a 5x100 bolt pattern, tightened to about 103 Nm (76 ft-lbs). Always double-check against your specific trim and any aftermarket components to ensure proper fit and safety.