The lug nuts for a 2007 Honda Odyssey use a 19 mm hex socket and thread onto M12 x 1.5 wheel studs; tightened to about 80 ft-lbs (108 Nm). Always confirm with the owner's manual or a trusted mechanic for your exact wheel setup.
Technical specifications for the 2007 Odyssey
Understanding the core measurements helps you perform maintenance safely, especially if you’re rotating tires or replacing wheels. The following specifications cover the factory configuration most common to this model year.
The key specifications you should know before service are:
- M12 x 1.5 thread size for the wheel studs (lug nuts thread onto these studs)
- 19 mm hex size for the lug nuts (socket size needed to tighten/loosen)
- Typical torque specification around 80 ft-lbs (108 Nm) for factory lug nuts
These figures reflect the common factory setup for a 2007 Odyssey. If your vehicle has aftermarket wheels or different lug nut designs, verify each item before installation to ensure proper fit and safety.
Notes on verification and safety
To confirm the exact specs for your vehicle, consult the owner's manual, the vehicle’s door jamb placard, or the service manual. If you’re unsure, have a professional mechanic verify lug nut size, hex, and torque during a wheel service to prevent damage to wheels or studs.
Practical guidance for owners
When performing tire rotations, wheel changes, or brake work, follow best practices: use the correct size socket (19 mm), work on clean threads, and torque to the recommended specification. If aftermarket wheels are installed, always consult the wheel manufacturer’s guidelines in addition to Honda’s specifications to avoid safety risks.
Summary
For a 2007 Honda Odyssey, expect lug nuts with a 19 mm hex and M12 x 1.5 wheel studs, tightened to roughly 80 ft-lbs (108 Nm). Verify with your manual or a qualified technician, especially if aftermarket wheels are involved, to ensure proper fit and safety.