The stock lug nuts on a 2002 Toyota Camry are M12 x 1.5 with a 60-degree conical seat, tightened with a 19 mm wrench, and fit a 5 x 114.3 mm bolt pattern (five lug nuts per wheel).
This article explains the standard sizing for this model, how to verify your specific hardware, and what to watch for when dealing with aftermarket wheels or variations.
Standard lug nut specifications for the 2002 Camry
Key details you should know when inspecting or replacing lug nuts on this model include thread size, seat type, hex size, bolt pattern, and the number of lug nuts per wheel. The following quick reference covers these essentials.
- Thread size: M12 x 1.5
- Seat type: 60-degree conical (tapered) seat
- Nut hex size: 19 mm
- Bolt pattern: 5 x 114.3 mm
- Number of lug nuts per wheel: 5
These specifications cover stock wheels; some aftermarket wheels may use different sizes or seat types, so verify by measuring the lug nut or checking with the wheel manufacturer.
How to verify the correct lug nut size for your car
To confirm the lug nut size on your specific Camry, check the owner's manual or the door jamb placard for wheel lug specifications. If you are replacing wheels, inspect the existing lug nuts for stamped metrics (if present), or physically measure the nut across flats and the thread engagement. When in doubt, consult the wheel manufacturer or a qualified technician to ensure compatibility with your vehicle’s hubs and alignment.
Always use the proper torque when tightening lug nuts and follow the vehicle’s recommended specifications provided by Toyota or the wheel manufacturer to maintain safety and wheel integrity.
Summary
For a 2002 Toyota Camry, expect M12 x 1.5 lug nuts with a 60-degree conical seat, a 19 mm hex size, and a 5 x 114.3 mm bolt pattern, with five lug nuts per wheel. This reflects stock configuration; aftermarket wheels can differ. Verify with manuals or wheel providers, and torque to the recommended specification using an appropriate torque wrench.