The stock rims for the 2000 Honda Civic Si are 15 inches in diameter, with most configurations using a 15x6 wheel and a 4x100 bolt pattern. These specs are common for the model in North America, but exact sizes can vary slightly by market and wheel design.
Stock rim specifications for the 2000 Civic Si
The following details summarize the typical dimensions reported for the 2000 Civic Si’s factory wheels. Exact numbers can vary by region and optional equipment, so always verify against your vehicle’s door sticker or manufacturer documentation.
- Diameter: 15 inches
- Width: 6 inches (6.0J)
- Bolt pattern: 4x100
- Offset: approximately +40 to +45 mm (commonly around +43 mm)
- Center bore: about 56.1 mm
These specifications describe the classic stock setup that many owners encountered on US-spec 2000 Civic Si models. Variations can occur with different regional releases or aftermarket wheel choices.
How to verify your exact wheel size
To ensure you have the precise dimensions for your specific car, follow these steps. This will help you shop for replacements or perform a proper fitment check without guessing.
- Check the driver's door jamb sticker for wheel and tire specifications, which lists the stock wheel size and tire inflation data.
- Inspect the wheel itself for stamped markings that indicate size, such as “15x6JJ ET43” along with the bolt pattern “4x100.”
- Consult the owner's manual or the Honda parts catalog for your VIN to confirm the original wheel size and offsets.
- When in doubt, measure the wheel directly: diameter across the rim, width (inner to outer edge), and the offset from the mounting surface to the centerline of the wheel.
Knowing the exact numbers on your car will help you select replacements that fit properly, avoid rubbing, and maintain correct speedometer readings and braking performance.
Summary
In brief, the 2000 Civic Si commonly used 15-inch wheels, about 6 inches wide, with a 4x100 bolt pattern and an offset around +40 to +45 mm, plus a center bore near 56.1 mm. Always verify with your door sticker or wheel stamping to confirm the precise size for your vehicle, especially if you’re shopping for replacements or upgrading to aftermarket rims.