The 2014 Hyundai Santa Fe with the 2.4-liter engine takes about five quarts of engine oil, including the filter.
For a full oil change, Hyundai’s guidance centers on an oil capacity near 5.0 quarts with the filter in place, roughly 4.7 quarts if the filter is not replaced. The recommended viscosity is 5W-20, with 5W-30 acceptable in very hot climates or under certain operating conditions. Synthetic oil is fine, as is conventional oil, but always verify exact requirements in the owner’s manual and check the level with the dipstick after refilling.
Oil capacity specifics for the 2.4-liter Santa Fe
These figures reflect typical guidance for the 2014 Santa Fe equipped with the 2.4L four-cylinder engine; always verify with your owner’s manual or Hyundai service literature.
- Capacity with filter: about 5.0 quarts (roughly 4.7 liters)
- Capacity without filter: about 4.7 quarts (roughly 4.4 liters)
- Recommended oil viscosity: 5W-20 (5W-30 can be used in certain climates or operating conditions)
- Oil type and spec: API SN or newer, ILSAC GF-5 equivalent; accepts conventional or synthetic oils per manual guidance
Before reviewing the numbers, note that capacity can vary slightly depending on whether the oil filter is replaced during the change.
After completing an oil change, always verify the oil level with the dipstick and top off in small increments until the level sits at or near the full mark.
Maintenance considerations and tips
Hyundai typically recommends changing engine oil every 5,000 miles with conventional oil or extending intervals when using synthetic oil, depending on driving conditions and the specific oil used. Always follow the maintenance schedule in your owner’s manual for best results and engine longevity.
Summary
For the 2014 Hyundai Santa Fe 2.4L, plan to use about five quarts of engine oil during a full change with a new filter, using 5W-20 oil as a baseline. Confirm exact quantities with the dipstick after filling, and consult the owner’s manual for your climate and oil type recommendations to maintain optimal engine health.
Can I use 5W-30 instead of 5W20 in my Hyundai?
Yes, you can switch; all you need to do is change the oils.
What oil does a Santa Fe 2014 take?
What type of oil does a 2014 Hyundai Santa Fe Sport take? The turbocharged 2.0L engine performs best with full-synthetic oil that meets Hyundai specifications—many technicians recommend 5W-30 full synthetic for balance of protection and efficiency.
How much oil does a 2014 Santa Fe 2.4 take?
around 5.1 quarts
Understanding Your 2014 Santa Fe Sport's Oil Capacity
Generally speaking, the 2.4L engine versions typically require around 5.1 quarts (4.8 liters) of oil, whereas the 2.0L Turbo engine versions usually need around 4.8 quarts (4.5 liters).
What is the weakness of the Hyundai Santa Fe?
Grandparents. Kids and everyone's luggage in one vehicle. But the Santa Fe third row is going to leave your passengers cramped uncomfortable. And complaining about the lack of leg room.