The rear wiper blade on a 2011 Honda Fit is 11 inches long (about 28 cm).
This size applies to most 2011 Fit models, but it’s wise to verify by measuring the blade on your hatch or checking the owner’s manual. If you’re shopping, look for an 11-inch rear blade and the appropriate adapter for the Fit’s wiper arm.
Confirming the correct size for your year
The official rear wiper blade length for the 2011 Honda Fit is 11 inches. To verify, you can measure the current blade or consult the vehicle’s documentation. If you purchase an aftermarket blade, ensure it is listed as 11 inches (28 cm) and compatible with the Fit’s rear wiper arm connector.
How to measure your blade
To confirm the size on your own, extend the rear wiper arm away from the glass, lay the blade flat, and measure from tip to base. If the blade is slightly longer or shorter, verify compatibility with your model year before buying a replacement.
Common 11-inch rear wiper blade options from well-known brands include:
- Bosch 11-inch rear wiper blade
- Rain-X 11-inch rear wiper blade
- Anco 11-inch rear wiper blade
- Honda Genuine 11-inch rear wiper blade
These options are widely available and designed to fit the 11-inch sizing for the 2011 Fit. When shopping, confirm that the product specifies an 11-inch length and the correct adapter for your wiper arm.
Replacement steps
Follow these basic steps to replace the rear wiper blade on a 2011 Honda Fit. The process is straightforward and can be completed with minimal tools.
- Purchase an 11-inch rear wiper blade compatible with the 2011 Fit and its Connector type.
- Lift the rear wiper arm away from the window until it stays in a raised position.
- Depress the release tab or mechanism on the blade housing to detach the old blade from the wiper arm.
- Attach the new blade onto the arm, ensuring it locks with a click or secure connection.
- Lower the wiper arm back onto the glass and test the operation on low and high settings to verify proper contact and clearance.
Be careful when lowering the arm to avoid pinching your fingers or the blade against the glass. If the blade doesn’t click into place, remove it and retry with the correct orientation and adapter.
What if your model varies?
Some regional market or trim variations could affect accessory packaging or the exact connector type. If you’re unsure, bring the old blade to a parts retailer or consult Honda’s parts diagram for your specific VIN. In most cases, an 11-inch blade with the appropriate adapter will fit a 2011 Honda Fit.
Summary
For a 2011 Honda Fit, use an 11-inch rear wiper blade (28 cm). Verify by measuring the current blade or checking the owner’s manual. When replacing, purchase a compatible 11-inch blade, follow the simple installation steps, and test the wiper to ensure proper operation. If in doubt, consult a parts professional to confirm the correct adapter and fit for your vehicle.