There isn’t a single universal oil filter part number for all Kia Niro models. The correct filter depends on the Niro’s engine and model year, so you must verify it for your specific vehicle.
Why the part number isn’t universal
Different Niro configurations use different engines and oil-filter designs. In addition, some model years introduce updated engine codes or filter specifications. The result is multiple possible part numbers, or in the case of the fully electric version, no oil filter at all.
Engine options and filtering requirements
Most Kia Niro Hybrids and Plug‑in Hybrids with internal combustion use an oil filter, but the exact filter part number is tied to the engine code and year. The Niro EV, by contrast, does not have an internal combustion engine and therefore does not require an oil filter.
To identify the correct oil filter part number for your Niro, follow these steps:
- Determine your exact model year and the engine type (for example, Hybrid or Plug‑in Hybrid with a 1.6L engine).
- Locate your vehicle’s VIN (Vehicle Identification Number) – usually found on the driver’s side dashboard or door jamb.
- Use the VIN to look up parts in an official Kia parts catalog or through a dealer portal, which will list the specific oil filter compatible with your engine code and year.
- Cross-check the listed part number on the filter packaging or in the parts catalog to ensure it matches your engine’s specifications.
- If you’re replacing with an aftermarket filter, confirm compatibility with the exact Kia engine code and consult the parts supplier or a Kia dealer to avoid fitment issues.
For those who prefer a straightforward approach, the most reliable route is to contact a Kia dealer or use an official parts lookup with your VIN. This ensures you receive the exact oil filter part number for your Niro’s engine and year.
Notes on variants and practical guidance
Key takeaway: there isn’t one part number that fits every Kia Niro. EV models have no oil filter, while Hybrid and Plug‑in Hybrid variants will have an oil filter with a part number that varies by engine code and production year. Always verify with VIN-specific lookup to avoid ordering the wrong part.
Summary
In short, the oil filter part number for a Kia Niro depends on the vehicle’s engine and year. Use your VIN to perform a parts lookup at a Kia dealer or official parts catalog to obtain the exact filter number. If you drive an EV, there is no oil filter to replace. For hybrids and plug‑ins, consult the VIN‑based catalog or ask a dealer to ensure correct fitment, and remember that exact numbers can change with model year and engine revisions.
How to find out which oil filter you need?
And impurities from the oil on the other hand if you mostly drive on highways. And in clean conditions. A standard filter may suffice. For look for oil filters with advanced.
What type of oil does a Kia Niro take?
Oil Grade: SN+
| Viscosity: | 0W-16 (All TEMPS) - Full Synthetic engine oil is preferred. |
|---|---|
| Capacity: | 4 quarts (with filter). After refill check oil level. |
| Torque: | 25-33 ft/lbs (Oil Drain Plug) Replace drain plug gasket. Only use an OE drain plug. |
| Notes: | (1) Full Synthetic engine oil is preferred. |
What oil filter does a 2019 Kia Niro take?
OEZ by Premium Guard – Oil Filter: Ideal for Any Type Oil, Same Filter Installed From The Factory (Part No. 26300-35505)
What is part number 26300 35505?
Engine Oil Filter
Description: This OEM Hyundai engine oil filter, part number 26300-35505, captures and contains impurities and other contaminants in motor oil. It's compatible with many Hyundai cars and SUVs from between 1986 and 2021.