The short answer: SAE 5W-30 engine oil that meets API service SM or newer and ILSAC GF-4/5 is recommended for most conditions, with a total capacity of about 5.3 quarts (5.0 L) including a filter. You can use conventional, synthetic blend, or full synthetic oil as long as it meets the specified standards.
This article explains the official guidance for the 2009 Murano, covering viscosity options, required specifications, capacity, and maintenance considerations. It also notes climate considerations and where to verify exact requirements for your vehicle.
Recommended oil types and viscosity
Most 2009 Murano models with the 3.5-liter V6 are designed for a standard viscosity of 5W-30. In very cold environments, 0W-30 can be considered, but always confirm with the owner's manual or a Nissan service advisor. Oils must meet appropriate API and ILSAC specifications, and you may choose conventional, synthetic-blend, or full synthetic as long as the oil meets those specs.
- Viscosity standard: 5W-30 for normal operating temperatures.
- Cold-weather option: 0W-30 can be used in extremely cold climates (verify with the owner’s manual).
- Oil type options: conventional, synthetic-blend, or full synthetic are all acceptable if they meet API and ILSAC standards.
- Specifications to look for: API service category SM (or newer) and ILSAC GF-4/5 (or newer); Nissan-approved or equivalent oils are acceptable.
In practice, 5W-30 is the most commonly recommended choice for daily driving in a wide range of climates, with 0W-30 reserved for severe cold conditions. Always verify the specific grade recommended for your climate in the manual or with a Nissan dealer.
Oil capacity and specifications
Know the engine oil capacity and the required specifications to ensure proper lubrication and filter fitment. The 3.5L V6 Murano engine uses about 5.3 quarts of oil with a new filter per change. Use a compatible oil filter and select an oil that matches the required API/ILSAC standards and viscosity.
- Capacity: Approximately 5.3 quarts (5.0 L) with filter.
- Oil standards: API SM (or newer) and ILSAC GF-4/5 (or newer).
- Oil type: Nissan-approved motor oil or equivalent that meets the above specs.
Always fill to the full mark on the dipstick after an oil change and double-check the level after warm-up and a short idle.
Maintenance intervals and tips
Oil-change intervals depend on oil type and driving conditions. Conventional oil typically requires more frequent changes, while synthetic or synthetic-blend oils permit longer intervals when driving normally. Follow Nissan’s guidance for normal vs. severe driving conditions and adjust based on climate, driving habits, and vehicle age.
- Conventional oil: change roughly every 3,000–5,000 miles (about 5,000–8,000 km) or as recommended in the manual.
- Synthetic or synthetic-blend: intervals commonly extended to about 5,000–7,500 miles (about 8,000–12,000 km) under normal driving.
- Severe driving conditions: more frequent changes may be required; consult the owner’s manual or a Nissan service professional for a personalized schedule.
Remember to monitor oil level regularly and heed any warning signs such as consumption or unusual engine noises. When in doubt, consult a Nissan dealer or the owner’s manual for climate- and VIN-specific recommendations.
Quick takeaways
Summary of practical guidance: For a 2009 Murano, use 5W-30 oil that meets API SM or newer and ILSAC GF-4/5; capacity is about 5.3 quarts with a filter; you may choose conventional, synthetic-blend, or full synthetic. In very cold climates, 0W-30 can be considered, but always confirm with the manual or a dealer.
Summary: The recommended oil for most 2009 Nissan Murano models is 5W-30 that meets API SM or newer and ILSAC GF-4/5, with about 5.3 quarts of oil per change. Use a compatible oil type (conventional, synthetic-blend, or full synthetic) and follow climate-appropriate intervals per the owner's manual.
Final note: For the exact specification, capacity, and interval tailored to your vehicle’s VIN and local climate, consult the owner's manual or contact a Nissan dealership or certified technician.
In short, choosing the right oil for a 2009 Nissan Murano comes down to a 5W-30 grade that meets API and ILSAC standards, a capacity of about 5.3 quarts with filter, and a change interval aligned with your driving conditions and oil choice.
What year to stay away from Nissan Murano?
As it turns out, the cost of repairs is in order from lowest to highest.
- 2004 Nissan Murano: Faulty Door Handle.
- 2005 Nissan Murano: Broken Driver Seat.
- 2006 Nissan Murano: Steering/Broken Seat.
- 2007 Nissan Murano: Broken Seat.
- 2009 Nissan Murano: Brake Problems.
- 2015 Nissan Murano: Transmission Issues.
What type of oil does a 2009 Nissan Murano need?
5W-30
Oil Recommendations for Older Murano Models
2009–2014 Murano: Nissan recommended 5W-30, with many owners shifting to synthetic blends for added protection.
How many quarts of oil does a 2009 Nissan Murano 3.5 L take?
4.9 quarts
Oil Grade: API*
| Viscosity: | 5W-30 (All TEMPS) |
|---|---|
| Capacity: | 4.9 quarts (with filter). After refill check oil level. |
| Torque: | 25 ft/lbs (Oil Drain Plug) |
What is the most common problem with the 2009 Nissan Murano?
The most common 2009 Nissan Murano problems involve important brake components, such as the brake pedal, anti-lock braking system (ABS) controller, and master cylinder. Many owners have complained that their brake pedals would suddenly go soft, so much so that it sometimes reaches the floorboard.