For Audi petrol cars, use a synthetic engine oil that meets Volkswagen Group specifications. The exact specification and viscosity depend on the model and year, with 502 00, 504 00 and 507 00 being the primary standards you’re likely to encounter. Always check the owner’s manual or the oil filler cap to confirm the correct specification.
Understanding the main Volkswagen Group oil specifications
These are the primary VW Group oil specifications you’re likely to see on Audi petrol vehicles. They indicate compatibility with Audi engines and the required performance and drain intervals.
- VW 502 00: A common specification for many gasoline engines with standard drain intervals; typically requires synthetic oil that provides good high-temperature protection.
- VW 504 00: A long-life specification for certain turbocharged and direct-injected petrol engines, often paired with extended drain intervals and modern emission systems.
- VW 507 00: A long-life, low-SAPS specification used on newer Audi models that demand extended drain intervals and strong protection for modern catalysts and particulate filters.
These specs cover a broad range of Audi petrol engines. Because Audi updates its engine designs regularly, the exact required specification can vary by model and production year. When in doubt, always verify against the official documentation for your car.
Common oil viscosities used in Audi petrol engines
The viscosity grade you choose depends on climate, driving style and the specific engine; some engines are approved for multiple grades. Here are typical options you’ll encounter in modern Audis.
- 0W-20: Frequently recommended for many newer turbocharged petrol engines, especially in colder climates or when the manufacturer specifies high fuel efficiency.
- 0W-30 or 5W-30: Common in a wide range of Audi petrol engines that require good cold-start performance with solid protection at operating temperature.
- 5W-40: Often used in older or higher-load petrol engines and in warmer climates; provides robust protection at higher temperatures.
Always ensure the viscosity you choose is approved for your specific engine and matches the VW Group spec required for your model.
Practical steps to select the correct oil for your Audi
If you want a quick, reliable way to confirm the right oil, follow these steps. The list explains how to verify the exact specification and viscosity for your car.
- Consult the owner’s manual or the oil specification on the fuel filler cap or oil cap for the exact VW Group rating and viscosity.
- Check the service booklet or the Audi MyAudi/official portal for the recommended grade and specification tied to your VIN.
- Look at the engine’s current oil cap or the dipstick label, which sometimes lists the required specification (502 00, 504 00, or 507 00) and viscosity.
- Ask an authorized Audi dealer or a qualified technician if you’re unsure about which oil to use, especially for high-performance or recently updated engines.
- Choose a brand and product that clearly states the VW Group specification on the bottle, ensuring it’s synthetic and meets the required grade and performance.
Clear verification helps prevent using an oil that could compromise performance, emissions, or warranty coverage.
Summary
In short, Audi petrol engines typically require synthetic oil that meets VW Group specifications such as 502 00, 504 00, or 507 00. The exact specification and viscosity depend on your model and year, so always verify with the owner’s manual, the oil cap, or an authorized Audi service. When in doubt, opt for a reputable brand oil that explicitly states the correct VW specification andpreferred viscosity for your car.