Short answer: Use the Honda OEM oil filter, typically 15400-PLM-A01, with some later builds using 15400-PLM-A02; if OEM isn’t available, choose a reputable aftermarket filter that fits the S2000’s 3/4-16 thread and meets Honda’s specifications.
OEM filter options
The following are common Honda OEM part numbers that have appeared on S2000s. Confirm the exact number for your vehicle using a VIN-based parts lookup or your dealer’s catalog.
- 15400-PLM-A01
- 15400-PLM-A02
Note: Honda periodically updates the superseded number across production runs and regions. Always verify the current part number in the official parts database or with a dealer for your VIN.
Aftermarket cross-reference
If you cannot source the OEM filter, you can use a high-quality aftermarket filter that fits the S2000’s oil filter housing (standard Honda 3/4-16 thread) and meets or exceeds OEM performance. Choose models from reputable brands and verify compatibility with your year and market.
- Brand options commonly cross-referenced for Honda applications include Wix, Bosch, Purolator, Mann-Filter, and K&N. Check the specific model number to ensure exact fitment for the S2000.
Always compare the filter’s thread size, gasket diameter, and overall dimensions to the OEM part to ensure a proper seal and adequate clearance in the engine bay.
How to verify compatibility
Enter your car’s year, trim, and VIN into a trusted parts database or ask your dealer to confirm the exact cross-reference. Ensure the filter lists a 3/4-16 thread and the correct gasket size for the S2000’s oil filter housing.
Installation and maintenance tips
Prepare for an oil change by warming the engine, using a suitable container to catch old oil, and having fresh oil on hand. When installing the new filter, apply a thin coat of new oil to the gasket, screw it on by hand until snug, then tighten according to manufacturer guidelines (usually hand-tight plus a quarter to half turn; avoid over-tightening). Use the oil type and capacity recommended in your owner’s manual (Honda typically calls for 0W-20 synthetic in many markets, though climate and year can vary). Replace the filter at every oil change and inspect the drain plug and gasket for wear.
Conclusion
For most S2000 owners, the simplest and most reliable choice is the OEM filter—15400-PLM-A01—with consideration given to any superseding number (often 15400-PLM-A02) for later builds. If OEM is unavailable, select a trusted aftermarket filter that fits the Honda 3/4-16 thread and matches the vehicle’s specifications, after verifying compatibility with your VIN.
Summary
The Honda S2000 uses a standard oil filter with a 3/4-16 thread. The typical OEM options are 15400-PLM-A01 and the superseded 15400-PLM-A02 for newer builds. When selecting aftermarket filters, opt for reputable brands and confirm exact fitment for your year/model via VIN-based parts lookup or dealer guidance.