Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

What is the number for the Wix oil filter on a 2014 Jeep Wrangler?

For a 2014 Jeep Wrangler, there isn't a single Wix part number that fits every configuration. The correct Wix oil filter depends on the engine installed in your Wrangler. The 2014 Wrangler JK commonly uses the 3.6L Pentastar V6, and Wix often lists 51365 as a fit for that engine, but you should verify the exact match in Wix’s catalog or cross-reference with the OEM filter.


Understanding the Wrangler's engine options in 2014


The Wrangler lineup for 2014 primarily used the 3.6L Pentastar V6, with older 3.8L engines phased out earlier. Filter compatibility is determined by engine model, not just year, so confirm the engine code on your vehicle's data plate or your VIN to ensure the right Wix number.


How to confirm the exact Wix filter for your Wrangler


The steps below help you confirm the precise Wix oil filter for your vehicle.


Before you begin the verification, know that the Wix number should be matched to your engine and model configuration.



  • Identify your engine and model year from the VIN or under-hood label to determine whether you have the 3.6L or another engine.

  • Use Wix’s official catalog or a trusted retailer's Wix cross-reference tool by entering year, make, model, and engine to retrieve the exact part number.

  • Cross-check the Wix number against the OEM Mopar filter part number listed for your Jeep to confirm compatibility.

  • Examine the replacement filter's labeling to ensure the thread size, gasket diameter, and overall size match your vehicle's specifications.


Conclusion: By following these steps, you can confirm the correct Wix oil filter number for your 2014 Wrangler, regardless of engine variation.


Common note for the 3.6L engine


For the 3.6L Pentastar engine, Wix commonly lists a filter that fits Wrangler JK models from this era. The exact Wix part number should be verified through Wix’s catalog or a trusted retailer to ensure it matches your vehicle’s trim and oil capacity.


Summary: The Wix oil filter number for a 2014 Jeep Wrangler depends on the engine. The 3.6L engine is commonly associated with Wix part number 51365, but always verify with Wix’s official catalog or a parts professional using your VIN to ensure a correct fit.

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.