The correct oil filter for a 2020 Honda Civic depends on the engine installed in your car. Most Civics use either a 2.0-liter naturally aspirated engine or a 1.5-liter turbocharged engine, and each has a specific OEM filter part number. Always verify with your vehicle’s VIN to be sure.
Engine variants and corresponding oil filter part numbers
The two main engine choices in the 2020 Civic determine which oil filter you should buy. Here is a concise guide to the typical OEM part numbers used for these engines. If you are unsure, confirm via Honda’s official parts lookup using your VIN.
- 1.5L turbocharged engine (common in EX, EX-L, Touring; Si may use a tuned variant): Honda oil filter part number 15400-PLM-A02.
- 2.0L naturally aspirated engine (common in LX and some Sport configurations): Honda oil filter part number 15400-PLM-A01.
Note: Parts catalogs can vary by region and production run. Always double-check the exact filter using your car’s VIN or under-hood identification marks before purchasing.
How to confirm the exact filter for your Civic
To ensure you get the exact filter, use these verification steps before buying or ordering online.
- Check the owner’s manual or the label on the oil filter cap for the part number.
- Enter your VIN on Honda’s official parts lookup to see the precise filter for your vehicle configuration.
- Ask a Honda dealer parts desk with your VIN if you prefer in-person confirmation.
Verifying the exact part number helps avoid mismatches and ensures optimal filtration and oil flow for your Civic’s engine.
Tips for replacing the oil filter safely
When performing an oil change, pairing the correct filter with the recommended oil and following proper procedure is important for engine health.
- Use the recommended engine oil (for most 2020 Civics, 0W-20) and the appropriate filter wrench or tool.
- Warm the engine to operating temperature, drain old oil completely, and replace the old drain plug gasket if applicable.
- Install the new filter per the manufacturer’s torque specification and avoid overtightening.
- Dispose of used oil and the old filter at an approved recycling facility.
Following these steps helps maintain proper oil filtration, engine cleanliness, and long-term reliability.
Summary: For a 2020 Honda Civic, the oil filter you need depends on the engine type. Use 15400-PLM-A02 for the 1.5L turbo engine and 15400-PLM-A01 for the 2.0L engine, but always verify with your VIN via Honda’s parts lookup to be sure. Pair the filter with the correct oil and follow standard oil-change practices for optimal engine protection.