The standard oil filter for most 2019 Sentra models with the 1.8-liter engine is Nissan Genuine Part 15208-5Y01A. Always verify the exact part using your VIN or owner's manual, as trims and regional variants can differ.
Overview: engine and filter fit
In 2019, the Sentra commonly uses a 1.8-liter four-cylinder engine. For most North American builds, this engine is compatible with a filter that threads and seals to the same dimensions, ensuring proper oil flow and sealing under typical driving conditions.
Engine variants and cross-compatibility
While the MR18DE 1.8L engine is the typical configuration, minor regional updates or service variants can affect exact part numbers. Always confirm by checking the engine code on the block or referencing the vehicle’s service documentation when ordering parts.
OEM vs aftermarket options
There are both OEM and aftermarket oil filters that fit the 1.8L Sentra. OEM filters provide the best guaranteed fit, while reputable aftermarket brands can be suitable if they clearly indicate compatibility with the MR18DE 1.8L engine and match the filter’s thread size, gasket diameter, and overall dimensions.
- Nissan Genuine Part: 15208-5Y01A
- Aftermarket equivalents: Reputable brands (such as Denso, Wix, and Bosch) offer filters listed as compatible with the 1.8L Sentra MR18DE. Always verify fit with the retailer using your VIN.
Conclusion: For most 2019 Sentras with the 1.8L engine, the OEM filter 15208-5Y01A is the standard choice. If you opt for an aftermarket filter, ensure it is explicitly described as compatible with the MR18DE 1.8L engine and that it matches the necessary thread size and gasket diameter.
How to verify the right part for your car
To buy the correct filter, follow these steps to confirm compatibility with your exact build:
- Check the owner's manual or service booklet for the recommended oil filter part number.
- Inspect the current oil filter for any part number or engine information that can guide the cross-reference.
- Use your VIN in Nissan’s parts lookup or a trusted parts retailer to confirm the exact filter for your vehicle’s configuration.
- If in doubt, contact a dealership or a trusted mechanic to confirm the proper filter for your year, trim, and engine code.
Following these steps minimizes the risk of purchasing the wrong filter due to regional or trim differences.
Maintenance notes: oil grade and service tips
Alongside selecting the correct filter, use the recommended oil grade and change interval as outlined in the owner's manual. Opt for a high-quality full-synthetic oil that meets the latest API specifications, and replace the filter with a new gasket during every oil change. Tighten to the manufacturer's specified torque to ensure a proper seal without over-tightening.
Summary
For a 2019 Nissan Sentra with the common 1.8-liter engine, the standard oil filter is Nissan Genuine Part 15208-5Y01A. Always verify with your VIN and the owner’s manual to account for any regional or trim differences. If using an aftermarket filter, ensure it is explicitly listed as compatible with the MR18DE 1.8L engine and matches the required dimensions. Pair with the recommended oil and follow the service intervals for best results.
What oil filter does a Nissan Sentra use?
15208-65F0E - Oil Filter Official Nissan Parts Store.
Where is the oil filter on a 2019 Nissan Sentra?
In a position to where it's still catching the oil. Oil from the drain bolt. And you know allow you to pull this filter off so it'll drain a little oil will be coming out there too there it. Goes.
What type of oil does a 2019 Nissan Sentra take?
synthetic 0W-20 oil
In general, you'll want full synthetic 0W-20 oil for a Nissan Sentra.
What oil filter does a 2019 Nissan Sentra need?
FRAM Titanium – Spin-on Oil Filter: Ideal For Synthetic Oil Protection to 20,000 miles (Part No. FS7317)