The 2014 Honda CR-V uses a cartridge-style oil filter for its 2.4-liter engine, and you should pair it with a compatible Honda cartridge filter (OEM or cross-referenced aftermarket). The common OEM option is 15400-PLM-A01, though some production runs list a different but related number; always verify against your vehicle VIN or current filter label.
Overview: why this matters for your CR-V
Knowing the exact filter type helps ensure proper filtration, fitment, and sealing. Unlike older spin-on filters, the CR-V’s cartridge filter sits in a dedicated housing and requires a compatible cartridge element. Getting the right part prevents leaks, ensures optimal engine protection, and makes maintenance smoother.
Primary filtration options for the 2014 CR-V
Below are the main avenues you can pursue when selecting a filter. A short note before the list explains what to expect from each choice.
Before you replace the filter, you have two broad paths: use the OEM cartridge filter specifically designed for the K-series 2.4L engine, or opt for a reputable aftermarket cartridge that cross-references to Honda’s filter standard. The VIN and production date can influence the exact number, so it’s wise to confirm with a parts lookup or your dealer.
- OEM Honda cartridge oil filter (most common for the 2.4L K-series in the 2012–2016 CR-V): typically listed as 15400-PLM-A01, with occasional variations by region or production run. This ensures a direct fit, seal compatibility, and Honda’s filtration standards.
- Honda cross-reference/alternate OEM numbers: some production years or regions use a nearby part number such as 15400-RAA-A01. If you see either number on your current filter or in a parts fiche, use that as the cross-check reference and confirm against your VIN.
- Approved aftermarket cartridge filters: brands like Wix, Bosch, Mann, and Fram offer cartridge-type filters that cross-reference to Honda K-series engines. When shopping aftermarket, verify cross-reference compatibility with your year, engine, and VIN to ensure proper fitment and sealing.
Concluding: For most 2014 CR-V owners, starting with the OEM cartridge filter 15400-PLM-A01 is a reliable choice, with aftermarket cross-references available from reputable brands after a quick VIN-based check.
How to confirm the exact part for your vehicle
Because part numbers can vary by production date and region, use one of these verification methods to lock in the correct filter:
- Check the current filter: remove the filter and read the stamped part number on the element or canister.
- Consult the owner’s manual or a dealer: provide your VIN to get the exact Honda part on the parts database.
- Use an online parts lookup: enter your VIN or select 2014 CR-V with 2.4L to pull the correct OEM number and a cross-reference list.
- Compare cross-references: if choosing aftermarket, ensure the cross-reference matches Honda’s filter standard for the K-series engine.
Concluding: Double-checking the exact part number against your VIN minimizes the chance of ordering the wrong filter and helps you avoid leaks or improper filtration.
Installation and maintenance tips
Whether you buy OEM or aftermarket, following best practices during filter changes will help protect the engine and ensure a proper seal.
- Warm up the engine briefly, then turn off and allow it to cool slightly to avoid burns from hot oil.
- Place a drain pan beneath the filter housing, loosen and remove the old cartridge, and wipe the housing clean.
- Install the new cartridge filter in the same orientation as the old one, ensuring the seal seats evenly.
- Replace the oil filter housing cap or seal as needed and torque to the manufacturer’s specification.
- Refill with the correct engine oil grade and amount as per the owner's manual, then check for leaks after starting the engine.
- Reset maintenance reminders if applicable and dispose of used oil and the old filter properly.
Concluding: Following the proper steps and using the correct part ensures optimal filtration and engine protection between services.
Recommended brands and general guidance
Choosing a reputable brand can offer consistent filtration performance and easier future replacements. Below is a quick guide to help you decide, while keeping in mind the need to cross-reference for your exact VIN.
- OEM Honda cartridge filters: proven fit and filtration for the K-series engine; best starting point for many owners.
- Aftermarket cartridge filters: Wix, Bosch, Mann, Fram, and similar brands are commonly compatible when cross-referenced to Honda’s specs; always verify the exact cross-reference for your vehicle.
Concluding: OEM is the safest choice for guaranteed fit, while reputable aftermarket options offer cost savings when properly cross-referenced.
Summary
For a 2014 Honda CR-V, the oil filter is a cartridge-type unit designed for Honda’s 2.4L K-series engine. Start with the OEM cartridge filter, typically 15400-PLM-A01, and verify against your VIN. If you opt for aftermarket options, use models from trusted brands and confirm cross-references to Honda’s filter standard. Always follow proper replacement procedures and refer to the owner’s manual for oil grade and capacity, then wrap up with a quick leak check and maintenance reminder.