The 2011 Honda Pilot uses Honda’s standard oil filter for the 3.5-liter V6, with the common OEM part number 15400-PLM-A02. This filter is designed for the J35 engine family and uses a 3/4-16 UNF thread, paired with the recommended 5W-20 engine oil. Always verify the exact part with your VIN or a dealer if you have a specific production variation.
Official part number and fitment
For the 2011 Pilot’s 3.5L V6 (engine code J35A), Honda’s service literature lists the OEM oil filter as 15400-PLM-A02. The filter is built to match the engine’s oil passages and sealing requirements, using the standard 3/4-16 UNF thread. Using the correct Honda filter helps maintain proper oil pressure and filtration for the engine.
Aftermarket compatibility
If you prefer aftermarket options, many brands offer cross-reference filters that fit the Honda 3.5L V6 (J35). When shopping, confirm that the filter is specified for 3.5L Honda/J35 engines and that it uses the same 3/4-16 UNF thread and similar gasket diameter. Also check that the filter height clears the Pilot’s engine bay to avoid rubbing or clearance issues.
- Bosch Premium FILTECH (verify model number for your 3.5L Honda/J35 application)
- Wix (offers cross-reference filters for Honda 3.5L V6 engines; confirm fitment)
- Fram (provides filters compatible with the 3.5L Honda V6; verify exact part number)
- Mobil 1 (synthetic filters that cross-reference to Honda 3.5L applications; check compatibility)
- K&N (performance-oriented filters designed to fit 3.5L Honda/J35 engines; confirm model and fitment)
Note: Always confirm the exact cross-reference for your vehicle’s trim level and production year with a retailer or Honda dealer, as catalogs can update part numbers or specify regional variations.
Replacement tips and steps
To replace the oil filter on a 2011 Pilot, follow standard oil-change procedures: warm the engine, lift the vehicle, place a drain pan under the filter, and remove the old filter. Clean the mounting surface, lightly lubricate the new filter’s gasket with fresh oil, thread the filter on by hand until snug, and tighten per the manufacturer’s specifications. Refill with the recommended 5W-20 engine oil and run the engine to check for leaks.
Summary
The 2011 Honda Pilot’s oil-change kit centers on the OEM filter 15400-PLM-A02 for the 3.5L V6. Aftermarket filters from major brands can be suitable provided they cross-reference correctly to the Honda 3.5L/J35 engine and use the 3/4-16 UNF thread. Always verify compatibility for your specific vehicle and follow proper oil-change procedures to maintain engine health.