The essential answer is that the 2010 Accord uses engine-specific oil filters: 15400-PLM-A01 for the 2.4L four-cylinder and 15400-RAA-003 for the 3.5L V6. Always verify the exact part with your VIN or the owner's manual, as production changes can occur.
In 2010, Honda offered two engines in the Accord: a 2.4-liter four-cylinder and a 3.5-liter V6. The correct filter varies by engine, and using the right part is important for proper lubrication, oil flow, and warranty considerations. This article outlines the official Honda part numbers and how to confirm the correct filter for your specific vehicle.
Engine options and their filters
Below are the engine-specific oil filter part numbers commonly used on the 2010 Accord. Always verify against your VIN to ensure you get the correct item, since production changes or regional variations can occur.
- 2.4L inline-four (engine code K-series): Honda OEM oil filter 15400-PLM-A01. Some production runs may use a superseding number; verify with VIN.
- 3.5L V6 (engine code J-series): Honda OEM oil filter 15400-RAA-003. As with the 2.4L, confirm the exact number for your vehicle via VIN or service documentation.
Both engines typically use 5W-20 engine oil, and when replacing the filter, you should confirm exact compatibility based on your vehicle’s VIN and manual. Rely on reputable sources or a Honda dealer to cross-reference if you’re unsure.
Summary
For a 2010 Honda Accord, use engine-specific filters: 15400-PLM-A01 for the 2.4L and 15400-RAA-003 for the 3.5L. Always verify with your VIN and manual before purchasing, and pair the filter with the recommended 5W-20 oil unless your climate or manual specifies otherwise. When in doubt, consult a dealer or trusted parts retailer for the exact match.