The 2006 Acura TL with the 3.2-liter V6 uses Honda’s standard oil filter designed for the J32A2 engine; the OEM part number most commonly associated with this application is 15400-PLM-A02. If you’re buying aftermarket parts, choose a filter that explicitly lists compatibility with Honda/Acura 3.2L V6 engines and verify the part number against your vehicle’s records. This article explains how to confirm the right filter and what to consider when replacing it.
Engine context and filter basics
The 2006 TL is equipped with the 3.2L V6 J32A2 engine. Typical oil capacity is around 5 quarts with filter; recommended oil grade is 5W-30 (synthetic or high-quality conventional, depending on climate and driving). When replacing the oil, you’ll need to remove the old filter, apply a thin layer of new oil to the gasket, and thread the new filter on until snug, then give it a final gentle turn as specified in the service manual.
OEM part number and compatibility
The Honda/Acura OEM oil filter for the J32A2 3.2L V6 in the 2006 TL is commonly listed as 15400-PLM-A02. Some production runs used nearby revisions; always verify against your specific VIN or with a dealer if you want to be certain.
To verify you’ve got the right filter before purchase or installation, use these checks:
- Check your vehicle’s VIN against Honda’s parts catalog to confirm the exact filter revision for your build.
- Inspect the label on your current filter (if accessible) for a matching part number, or take a photo to compare with OEM listings.
- Ask a Honda/Acura dealer or trusted parts retailer with your model, year, and engine code (J32A2) to confirm the correct filter.
- If buying aftermarket, ensure the product page explicitly states compatibility with Honda/Acura 3.2L V6 engines and the TL model.
Using an OEM or explicitly compatible aftermarket filter helps ensure proper fitment, sealing, and engine protection.
Aftermarket alternatives and installation tips
If you opt for an aftermarket filter, choose a reputable brand that lists compatibility with Honda/Acura 3.2L V6 engines. Always compare thread size, gasket diameter, and overall length to ensure a proper seal and clearance. When installing, lubricate the gasket with fresh oil, torque per service manual guidelines, and replace the drain plug gasket if recommended.
For best results, keep to the recommended oil change interval and monitor for leaks after installation.
Summary
In summary, the 2006 Acura TL uses Honda’s standard oil filter for the 3.2L V6 (J32A2), with the typical OEM part number 15400-PLM-A02. Verify the exact revision for your vehicle via VIN or dealer, and choose a filter that is explicitly compatible with Honda/Acura 3.2L engines if you go aftermarket. Regular oil changes using the correct filter help maintain engine health and performance.