The 2004 Honda Accord uses different oil filters depending on the engine: 2.4L four-cylinder uses Honda part number 15400-PLM-A01 and 3.0L V6 uses 15400-PLM-A02. Aftermarket filters with the same size and threading, such as Fram PH7317, are commonly used as replacements.
In practice, the Accord lineup for 2004 included two main engine options in many markets: a 2.4-liter inline-four and a 3.0-liter V6. Each engine family uses a different filter specification to ensure proper fit and sealing. The following sections outline the official part numbers by engine and some widely available aftermarket alternatives, plus tips to verify the correct filter for your car.
Engine configurations and official part numbers
The following list identifies the two primary engine options and the corresponding Honda OEM oil filter numbers. Use the exact part number when ordering from Honda or an authorized parts retailer, and verify against your VIN if possible.
- 2.4L inline-four engine: Honda OEM oil filter 15400-PLM-A01
- 3.0L V6 engine: Honda OEM oil filter 15400-PLM-A02
These part numbers reflect the two common configurations offered in the 2004 Accord in many regions. Always double-check, as regional variations or trim-specific options can lead to different part numbers.
Common aftermarket options
If you prefer aftermarket replacements, the following filters are widely marketed as fitting the 2004 Accord range (both 2.4L and 3.0L), provided you match the correct size and thread type for your specific engine.
- Fram PH7317
- Bosch 3330
When choosing aftermarket filters, confirm compatibility with your exact engine and model year, and ensure the filter’s thread size and gasket diameter match your vehicle. If in doubt, consult the retailer or a mechanic with your VIN handy.
How to verify the correct oil filter for your car
Before purchasing or installing, use these steps to confirm you have the right filter for your 2004 Accord:
- Identify your engine type (2.4L I4 vs 3.0L V6) using the vehicle’s manual, under-hood labeling, or your VIN.
- Inspect the currently installed filter for any part numbers or markings you can cross-reference.
- Consult a reputable parts retailer or Honda’s official parts catalog with your VIN to confirm the exact filter number.
- When in doubt, bring the old filter to the store to ensure the replacement matches in thread size, gasket diameter, and height.
Concluding: Verifying the engine type and cross-checking with the parts catalog will minimize the risk of ordering the wrong filter.
Summary
For a 2004 Honda Accord, the oil filter depends on the engine: 15400-PLM-A01 for the 2.4L engine and 15400-PLM-A02 for the 3.0L engine. Aftermarket options like Fram PH7317 and Bosch 3330 are commonly used substitutes when the correct size and thread are matched. Always verify with your VIN or the dealership/retailer to ensure the exact fit for your specific vehicle configuration.