Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

What oil filter does a 2000 Honda CRV take?

The 2000 Honda CR-V uses a 2.0-liter four-cylinder engine and typically takes Honda’s oil filter with part number 15400-PLM-A02.


In most markets, the 2000 CR-V (the first-generation model) runs the 2.0L B-series engine family (B20B/B20Z). The oil filter is a standard spin-on type, and the official Honda catalog generally assigns 15400-PLM-A02 to this application. Always verify against your vehicle’s VIN and local parts catalog, since regional variations can occur.


Common options and compatibility


The following options are commonly listed for this application. Use the exact packaging part number to ensure fitment.



  • Honda OEM filter: 15400-PLM-A02 (fits 1997–2001 CR-V with the 2.0L engine).

  • Note: Some regional catalogs may show nearby variants (e.g., 15400-PLM-A01 or 15400-PLM-A03). In most cases these are interchangeable, but confirm with your supplier.


Always verify with your VIN and current catalog before purchasing, as regional differences can occur in part numbering.


How to verify before purchase


To avoid mistakes, use these steps to confirm the right oil filter before you buy or install it.



  • Check your owner's manual for the official part number under Maintenance or Oil Filter.

  • Look up your vehicle by year, make, model, and engine code (2.0L B20B/B20Z) in an authorized Honda parts catalog or trusted retailer site.

  • If you still have the old filter, compare the part number on the filter or packaging (should match 15400-PLM-A02) and ensure the seal and mounting dimensions are compatible.


With a quick confirmation, you can be confident the filter will seal correctly and provide proper filtration for your engine.


Summary: For a 2000 Honda CR-V with the 2.0L engine, the typical OEM oil filter is 15400-PLM-A02. Always verify with your VIN and local catalog to ensure exact fit, as regional differences may apply.

What type of oil does a 2000 Honda CRV take?


Oil Grade: API*

Viscosity:10W-30 (Above -10°C) 5W-30 (Below 35°C)
Capacity:4 quarts (with filter). After refill check oil level.
Capacity:3.7 quarts. w/of. After refill check oil level.
Torque:33 ft/lbs (Oil Drain Plug)



What part number is the oil filter on a Honda CR-V?


15400-PLM-A02
This OEM Honda oil filter, part number 15400-PLM-A02, fits select Honda vehicles from model years 2000 all the way to 2021.



What is the oil filter number for a 2000 Honda CRV?


15400-PLM-A02) Genuine Honda original equipment oil filter for your Honda vehicle. Engineered and specified by Honda, this is the same filter as that which would be installed by your dealer.



What is the best oil filter for Honda CR-V?


  • STP Extended Life Premium Oil Filter S7317XL.
  • Honda Spin-On Canister Engine Oil Filter 15400-PLM-A02.
  • STP Extended Life Engine Oil Filter S3387AXL.
  • STP Extended Life Engine Oil Filter S5XL.
  • STP Extended Life Engine Oil Filter S8AXL.
  • STP Engine Oil Filter 15400-PLM-A02.
  • Mobil 1 Extended Performance Premium Oil Filter M1-108A.


Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.