The 2020 Honda Accord uses 0W-20 synthetic motor oil, with engine capacity depending on the powertrain: roughly 4.4 quarts for the 1.5-liter turbo and about 5.7 quarts for the 2.0-liter turbo, including the filter. It should meet API SN or ILSAC GF-5 standards. You may use a full-synthetic or synthetic blend that meets these specs, following the manual for exact intervals.
Oil type and specifications
The Accord’s two common engines for 2020 models—the 1.5-liter turbo and the 2.0-liter turbo—both call for 0W-20 oil. This viscosity supports cold starts and efficiency, and it aligns with Honda’s recommendations for modern engines. Acceptable classifications include API SN and ILSAC GF-5, with many brands offering oils that meet these standards.
Key specifications to note:
- Viscosity: 0W-20
- Oil type: Full synthetic or synthetic-blend meeting API SN / ILSAC GF-5
- All-season suitability: Works across a wide temperature range
- Branding: Honda Genuine Oil or any equivalent oil that meets the listed specs
Capacity varies by engine and is listed in the owner’s manual. The numbers below reflect typical fills including the oil filter.
Oil capacity by engine
1.5-liter turbocharged engine
Oil capacity (including the filter) is typically around 4.4 quarts (roughly 4.2 liters). Use 0W-20 API SN/GF-5 oil and verify the level with the dipstick after filling.
2.0-liter turbocharged engine
Oil capacity (including the filter) is typically around 5.7 quarts (roughly 5.4 liters). Use 0W-20 API SN/GF-5 oil and check the level to reach the full mark on the dipstick.
Always confirm exact capacities in the owner's manual or on the oil fill cap label, as variations can exist by model year or market.
Maintenance and oil changes
Oil change intervals depend on driving conditions and the oil you use. If your Accord is equipped with Honda’s maintenance minder, follow its prompts, which typically align with synthetic-oil schedules (often around 7,500 miles or more under normal conditions, though severe conditions may require shorter intervals). Replace the oil and the filter at each change and ensure the oil type remains 0W-20 with SN/GF-5 specifications.
Summary
For a 2020 Honda Accord, use 0W-20 oil that is either full synthetic or synthetic-blend and meets API SN/ILSAC GF-5 standards. Engine capacities are typically about 4.4 quarts for the 1.5L engine and about 5.7 quarts for the 2.0L engine, including the filter. Always consult the owner’s manual for exact figures and follow the recommended maintenance intervals.
What type of oil do I need for a 2020 Honda Accord?
The recommended Honda Accord oil is generally a synthetic 0W-20 formula. This motor oil can stand up to the intensity and temperature of your turbocharged engine, so you maximize performance on the Arlington roads.
Which is better, 1.5 t or 2.0 t?
While both engines impress with their own merits, the 1.5L turbocharged engine edges ahead in terms of both power and fuel efficiency. The turbocharger's internal cooling system helps maintain optimal engine temperature, thereby enhancing performance while minimizing the risk of overheating.
Can I use 5W30 instead of 0w20 in my Honda Accord?
"Use what the manufacturer recommends!" It's worth noting that some owners have reported using 5W-30 in their Honda Accords without issues, but others advise sticking to the recommended viscosity to avoid potential problems. The owner's manual for a 2017 Honda Accord V6 recommends 0W -20 or 5W-20 oil.
Can a Honda last 300,000 miles?
With the right Honda service, Honda Accord can hit 300,000 miles or more. If it's been a while since you had a check-up, stop by our Honda service center and have our team perform a tune-up. We'll perform a comprehensive inspection and get you back on the road in no time!