The 5.7 HEMI Durango typically requires 5W-20 synthetic-blend or full synthetic oil that meets Mopar MS-6395 and API SN or newer; 5W-30 can be used in hot climates or as allowed by your owner's manual. Always check your specific model year’s manual for the exact specification.
The Durango’s 5.7-liter V8 has powered Dodge’s SUV lineup for years, blending strong performance with modern lubrication standards. This article outlines the official guidance and practical considerations for choosing engine oil for the 5.7 HEMI Durango.
Oil types and specifications
Before listing the options, note that using the right specification is important for warranty coverage and engine longevity.
- Viscosity: 5W-20 is the default for most recent model years; 5W-30 can be used in very hot climates or when the manual specifies it.
- Oil type: Synthetic blend or full synthetic oils are acceptable, provided they meet Mopar MS-6395 and API SN (or newer) standards and ILSAC GF-5 or GF-6 depending on year.
- Specifications to look for: Look for API SN/PLUS or newer and Mopar MS-6395 on the bottle; avoid oils that don’t meet these specs.
In practice, the Durango's 5.7 HEMI expects an oil that balances protection, viscosity, and efficiency, with 5W-20 being the common baseline and 5W-30 permitted under certain conditions per the manual.
Oil capacity and change interval
Knowing the engine oil capacity and maintenance schedule helps with planning service visits.
- Oil capacity: Approximately 7 quarts (about 6.6 liters) with a filter change; check your exact year and dipstick reading, as capacities can vary slightly by variant.
- Change interval: Typically 5,000–7,500 miles under normal conditions with synthetic oil; in severe service (towing, dusty conditions, extreme heat), consider 3,000–5,000 miles. With full synthetic oils, many drivers extend toward the higher end if conditions are favorable.
Always follow the maintenance schedule in your owner's manual and use the oil specification recommended for your exact model year to ensure proper protection and warranty compliance.
Practical tips for selecting oil
Get the right balance of protection, fuel economy, and climate readiness with these pointers.
- Use oil that meets Mopar MS-6395 and API SN/Plus or newer; avoid oils without Chrysler/Mopar specification labeling.
- Check the oil level regularly and top up if needed between changes, but avoid overfilling.
- For hot climates or heavy towing, follow the more conservative OCI and consider the higher end of the recommended viscosity range if your manual allows it.
Adhering to these practices helps keep the 5.7 HEMI Durango running smoothly and supports long-term engine health.
Summary
For a 5.7 HEMI Durango, the standard oil is a 5W-20 synthetic-blend or full synthetic that meets Mopar MS-6395 and API SN/GF-5 or newer; 5W-30 can be used in hot climates or as allowed by the owner’s manual. The typical oil capacity is around 7 quarts with a filter, and maintenance intervals generally range from 5,000 to 7,500 miles, depending on driving conditions. Always consult your vehicle’s manual for the exact specification and capacity for your model year.