What oil does a 2016 Jeep Cherokee Latitude use?

The recommended oil is SAE 5W-20 motor oil (full synthetic preferred).

The 2016 Cherokee Latitude could come with one of two engines—a 2.4-liter Tigershark inline-four or a 3.2-liter Pentastar V6—so the exact specification is tied to the engine installed. In most cases, both engines use 5W-20, with climate and maintenance intervals influencing the final choice. Always confirm with the owner's manual or a Jeep dealer for your specific VIN.

Engine options in the 2016 Cherokee Latitude

Oil specifications by engine are listed below.

• 
  2.4L Tigershark I4
  
  Recommended oil: SAE 5W-20, full synthetic preferred. API SN (or higher) certification. Typical oil capacity with filter: about 5 quarts.
  

For the 2.4L engine, follow the standard 5W-20 specification and monitor your dipstick to ensure proper fill after an oil change.

• 
  3.2L Pentastar V6
  
  Recommended oil: SAE 5W-20, full synthetic preferred. API SN (or higher) certification. Typical oil capacity with filter: roughly 5.5–6 quarts, depending on the exact configuration.
  

In the 3.2L engine, the same 5W-20 grade is commonly used, but confirm the exact capacity and any climate-specific notes in the manual or with a dealer.

Maintenance notes and practical tips

Always use the oil grade specified for your engine and climate, and adhere to the recommended service intervals outlined in the owner's manual. If you drive in extreme temperatures or frequent short trips, synthetic oil may offer better protection and longer intervals between changes.

Bottom line: for a 2016 Jeep Cherokee Latitude, SAE 5W-20 is the standard recommendation across the main engines, with full synthetic oil preferred to maximize performance and protection.

Summary: The 2016 Cherokee Latitude generally uses SAE 5W-20 motor oil, with full synthetic preferred. The exact grade and capacity depend on whether your Latitude has the 2.4L Tigershark I4 or the 3.2L Pentastar V6, but both commonly call for 5W-20. Always consult the owner’s manual or a Jeep dealer for your specific vehicle and climate considerations.

Can I use 5W30 instead of 5W20 in my Jeep Cherokee?

Grand Cherokee oil requirements depend on your model year and engine configuration. Most 2016-newer models with the 3.6L Pentastar V6 require 0W-20 synthetic oil, while earlier models may specify 5W-20 or 5W-30. The 5.7L HEMI V8 typically uses 5W-20 (2011-2021) or 0W-20 (2022-newer), while SRT models require 0W-40.

What are the common Cherokee repairs?

The most common Jeep Grand Cherokee problems include transmission issues, electrical problems, suspension wear, oil leaks, and brake wear, especially on certain older model years.

What type of oil does a Jeep Cherokee Latitude take?

The 2022 Cherokee's engine sizes and oil types are: 2.0L Engine – Mopar Certified SAW 5W-30 Full Synthetic Engine Oil. 2.4L Engine – Mopar SAE 0W-20 Full Synthetic Engine Oil. 3.2L Engine – Mopar SAE 5W-20 Full Synthetic Engine Oil.

What type of oil does a 2016 Jeep Cherokee Latitude take?

Oil Grade: SEO11