The 2013 Honda Fit with its 1.5-liter engine uses 0W-20 full-synthetic engine oil, with a total capacity of about 3.7 quarts (3.5 liters) including the filter. The oil should meet API SN or newer and ILSAC GF-5 specifications, and Honda recommends Honda Genuine 0W-20 or an equivalent that meets those standards. In some markets, 5W-20 synthetic may be used if 0W-20 is unavailable, but you should verify with the owner's manual or a Honda dealer.
Oil type and specifications
The following options and specs reflect Honda's guidance for the Fit’s 1.5L engine. Choose the option that matches your climate and availability while ensuring the oil meets the required standards.
- Viscosity: 0W-20 synthetic (preferred, recommended for best fuel economy and engine protection)
- Alternative: 5W-20 synthetic if 0W-20 is not available, provided it meets API SN/ILSAC GF-5 and is used only as a temporary substitute
- Quality standards: API SN or newer with ILSAC GF-5; Honda Genuine 0W-20 or equivalent that meets these specs
- Engine capacity: Approximately 3.7 quarts (3.5 liters) of oil with a filter
Using the correct oil type helps maintain performance, efficiency, and engine longevity. If you drive in extreme temperatures or unusual conditions, consult your owner’s manual or a dealer for guidance on the best oil choice.
Climate and regional considerations
In practice, 0W-20 is the standard recommendation across most regions for the 2013 Fit. Some markets may permit 5W-20 as a substitute under certain conditions, but this should be treated as a temporary measure and should not replace the specified 0W-20 long-term. Always verify local requirements in the owner's manual or with a Honda service center.
Oil change intervals and monitoring
Oil change intervals depend on whether you use conventional or synthetic oil and on driving conditions. Honda’s maintenance minder system helps determine when an oil change is due, but general guidance for synthetic 0W-20 aligns with longer intervals than conventional oil changes. Always follow the maintenance minder and service schedule in your owner's manual.
Summary
For the 2013 Honda Fit, the recommended engine oil is 0W-20 full-synthetic that meets API SN/ILSAC GF-5 standards, with an oil capacity of about 3.7 quarts (3.5 liters) including the filter. A 5W-20 substitute can be used only if necessary and should be returned to 0W-20 as soon as possible, with verification from the owner's manual or a Honda dealer.