The 2010 Dodge Charger with a 3.5-liter V6 generally requires 5W-20 motor oil that meets Chrysler MS-6395. If 5W-20 isn’t available, 5W-30 can be used as a fallback, though it’s best to follow the owner's manual.
Understanding the specifics behind this recommendation helps ensure proper engine protection and performance. Below, you’ll find a concise breakdown of the recommended viscosity, standards, and practical guidance for keeping the 3.5 L V6 running smoothly.
Engine oil requirements
Before listing the recommended options, here are the key guidelines that apply to the 3.5 L V6 in the 2010 Charger.
- 5W-20 synthetic blend or full synthetic oil that meets Chrysler MS-6395 specifications.
- 5W-30 can be used when 5W-20 is unavailable or in hotter climates, as allowed by the owner's manual.
- Oil should meet API SN/ILSAC GF-5 or newer requirements in addition to MS-6395.
In short, aim for 5W-20 that meets MS-6395; 5W-30 is an acceptable fallback under certain conditions, but always confirm with the manual or dealer guidance.
Oil brands and compatibility
When shopping for oil, you’ll want products that clearly state compliance with MS-6395 and the appropriate viscosity on the label. The examples below reflect common, widely available options that meet the Chrysler specification.
- 5W-20 synthetic blend or full synthetic oils labeled as meeting MS-6395
- 5W-30 oils that also meet MS-6395 (for use when 5W-20 isn’t available or in hot climates)
- Brands such as Mobil 1, Pennzoil, Castrol, and Valvoline that offer MS-6395-compliant 5W-20 products
Note: Always read the product label to verify MS-6395 compliance and the 5W-20 or 5W-30 specification. If in doubt, consult your dealer or the owner’s manual for the exact recommendation for your vehicle’s climate and operating conditions.
Practical maintenance tips
Beyond knowing the correct viscosity and spec, here are quick tips to keep the engine in good shape over time.
- Use the oil filter recommended by Chrysler or a reputable aftermarket filter that matches OEM specifications.
- Follow the maintenance schedule for oil changes, typically every 3,000–5,000 miles for conventional oil or up to 6,000–8,000 miles for synthetic blends (check your manual).
- Keep an eye on oil level and color; if oil consumption seems high, have the PCV system and engine checked.
Sticking to the recommended oil and change intervals helps protect the engine’s longevity and performance, particularly in older vehicles where sealing and wear can begin to show.
Summary
The 2010 Dodge Charger with a 3.5 L V6 primarily calls for 5W-20 oil that meets Chrysler MS-6395, with 5W-30 as a sanctioned alternative if 5W-20 is unavailable or climate conditions warrant it. Always verify details in the owner’s manual or with a qualified technician, and choose an oil that clearly states MS-6395 compliance and the correct viscosity on the label.
What oil goes in a 2010 Dodge Charger 3.5 L?
Takes six quarts of 10W30.
What kind of oil does a 3.5 L V6 take?
2.7L & 3.5L EcoBoost V6: 5W-30 synthetic.
Can I use 5W-30 instead of 5W20 in my Dodge?
Using 5W-30 instead can reduce fuel economy and impede flow throughout the engine. While using it temporarily in a pinch likely won't cause your engine lasting harm, remember that the engineers who built your engine did so with a specific viscosity oil in mind, meaning it's best to stick with it.
At what mileage do chargers go bad?
The lifespan of a Dodge Charger is another testament to its reliability. Generally, Chargers are expected to last between 150,000 to 250,000 miles, a range supported by user experiences shared on forums and automotive communities.