The 2008 Toyota Camry’s gasoline engines are designed to run on SAE 5W-30 motor oil, with a total oil capacity of about 4.7 quarts (including the oil filter). You can use conventional, synthetic-blend, or full-synthetic oil, but always follow the owner's manual and inspect the oil cap or dipstick for the exact specification.
Oil grade and engine compatibility
The 2008 Camry was offered with two gasoline engines: a 2.4-liter four-cylinder and a 3.5-liter V6. For normal driving conditions, the recommended viscosity is 5W-30 for both engines, and you may choose from conventional, synthetic-blend, or full synthetic formulas based on your budget and climate.
Gasoline engine options
Both the 2.4L four-cylinder and the 3.5L V6 share the same primary oil viscosity recommendation of 5W-30, ensuring consistent protection across the Camry lineup’s gasoline models.
Oil specifications to look for
Choose oils that meet the appropriate API service category (SM or higher) and ILSAC GF ratings. This helps ensure compatibility with the engine’s tolerances and emissions controls.
Recommended oil options for the 2008 Camry include the following. Note that the exact specification can vary by climate and driving conditions; always verify with the owner's manual or under-hood markings.
- SAE 5W-30 viscosity (standard for both the 2.4L and 3.5L gasoline engines)
- Oil forms: Conventional mineral oil, synthetic-blend, or full synthetic (all with 5W-30 viscosity)
In summary, 5W-30 is the primary viscosity for the 2008 Camry’s gasoline engines, with the option to use any oil type that suits your driving needs while meeting API GF standards.
Capacity and replacement intervals
The engine oil capacity with filter for the 2008 Camry is about 4.7 quarts. The recommended change interval depends on driving conditions and oil type; conventional oil is typically changed around every 5,000 miles, while synthetic oils can extend the interval, often to around 7,500–10,000 miles in favorable conditions. Always consult the owner's manual for the exact schedule and use the dipstick to verify proper oil level between changes.
Hybrid considerations
If you own a Camry Hybrid from 2008, oil specifications and capacity may differ slightly from the gasoline models. Always refer to the specific hybrid section of the owner's manual or the oil cap labeling for the precise requirements.
Summary
For the 2008 Toyota Camry, the standard oil recommendation is SAE 5W-30 for both the 2.4L four-cylinder and the 3.5L V6 gasoline engines, with an approximate capacity of 4.7 quarts (including the filter). Oils can be conventional, synthetic-blend, or full synthetic, as long as they meet the appropriate API/ILSAC specifications. Always check the owner's manual and oil cap for the exact guidance, and tailor change intervals to your driving conditions. Hybrid models have their own exact requirements and should be checked separately.