The typical answer is that the 1.2 Juke uses a 0W-20 fully synthetic engine oil, with an estimated capacity of about 3.1–3.5 liters including the filter, depending on year and variant.
Oil specifications can vary by market and model year. Always verify the exact requirement in the owner's manual or with a Nissan dealer before purchasing oil. This article provides a general guide and notes regional differences.
Common oil grades and when to use them
Below are the oil grade options commonly compatible with the Juke 1.2, along with notes about when each might be appropriate.
- 0W-20 fully synthetic oil — the standard recommendation for most markets and model years.
- 5W-30 fully synthetic oil — may be acceptable if 0W-20 is unavailable in some regions, but you should confirm with Nissan for your VIN.
Conclusion for oil grades: 0W-20 is the preferred choice for the Juke 1.2; 5W-30 can be a fallback only if advised by Nissan or your dealer, and always ensure the oil meets the OEM specification and local requirements.
Capacity and service considerations
The Juke 1.2’s oil capacity (including the filter) is typically around 3.1–3.5 liters. Exact capacity can vary by model year and engine variant, so always confirm with the owner’s manual or a Nissan technician.
Before changing oil, keep these steps in mind to ensure you use the correct grade and quantity:
- Consult the owner’s manual or dealer to confirm the exact viscosity and specification for your VIN.
- Use a fully synthetic 0W-20 oil as the default if your manual specifies it; use 5W-30 only if approved for your market/year.
- Replace the oil filter and add oil gradually, checking level with the dipstick as you go to avoid overfilling.
- Dispose of used oil according to local regulations and reset the oil service indicators if applicable.
Keep in mind that maintenance intervals and capacities can vary; always follow the official schedule for your vehicle’s year and market.
Notes for reliability and performance
Using the correct oil grade helps maintain turbo efficiency, fuel economy, and engine longevity. Mixing oils or using non-recommended grades can affect performance and warranty coverage. If you’re unsure, contact a Nissan service center or your dealer with your VIN to confirm the exact specification for your Juke 1.2.
Summary
In most jurisdictions, the Nissan Juke 1.2 requires a 0W-20 fully synthetic engine oil, with an approximate capacity of 3.1–3.5 liters including the filter. A 5W-30 oil can be used only if explicitly approved for your vehicle by Nissan or a dealer. Always check the owner’s manual or consult a Nissan service professional to confirm the correct viscosity, specification, and oil change interval for your specific year and market.