The 2019 Kia Sorento generally uses SAE 5W-20 full-synthetic motor oil, and the OEM oil filter is commonly Kia part number 26300-35500. Exact part numbers can vary by engine (2.4L I4 or 3.3L V6) and market, so it’s best to verify with your VIN or by checking the official Kia parts catalog.
Engine options and oil specifications
The US-market Sorento lineup for 2019 offered two primary engines. Both engines share the same general oil specification, but you should confirm the exact filter and any capacity notes for your specific build.
- 2.4L inline-4 GDI engine: Recommended oil is SAE 5W-20 full synthetic; follow API SN or ILSAC GF-5 standards. Use the OEM oil filter specified for this engine when performing service.
- 3.3L V6 engine: Also typically listed as SAE 5W-20 full synthetic with API SN/ILSAC ratings; oil type and filter should align with the vehicle’s engine code and market.
In all cases, the goal is to maintain proper lubrication viscosity and filtration to protect the engine under normal and high-demand driving conditions. Always consult the owner’s manual or a Kia dealer if you’re unsure about the correct specification for your exact vehicle.
Oil filter part numbers
For most 2019 Sorento configurations, the commonly cited OEM oil filter number is 26300-35500. Because part numbers can vary by engine code and market, verify this number for your specific Sorento using your VIN or the Kia official parts catalog.
- OEM oil filter (typical for Sorento 2019): 26300-35500
If you’re buying aftermarket filters, ensure the replacement part is compatible with Kia’s 2019 Sorento engines and listed to fit the correct engine code in your vehicle. When in doubt, consult the parts department with your VIN to confirm a precise match.
How to verify the exact numbers for your vehicle
Because part numbers can differ by market, trim, and engine code, use these verification steps to be certain you have the correct oil and filter:
- Check the owner’s manual proof sheet and maintenance schedule for the recommended oil grade and capacity.
- Use your VIN on Kia’s official parts lookup or contact a Kia dealer’s parts department to pull the exact filter number and oil specification for your vehicle.
- When purchasing online or at a parts store, cross-check the listed part numbers against the VIN-derived specification to avoid mismatches.
These steps help ensure you select the correct oil type and filter for your specific Sorento configuration, especially in cases where engine codes or regional variants differ.
Summary
The 2019 Kia Sorento generally requires SAE 5W-20 full-synthetic oil, and the typical OEM oil filter number is 26300-35500. Exact numbers can vary by engine (2.4L I4 vs. 3.3L V6) and market, so always verify with your VIN through Kia’s parts catalog or your local dealer. Following the precise specifications helps maintain engine protection and warranty coverage.