The transmission fluid is Mopar ATF+4. The 2013 Chrysler 200’s six‑speed automatic requires this specification to ensure proper shifting and longevity.
The 2013 Chrysler 200 uses a six‑speed automatic transmission often referred to as the 62TE. Chrysler specifies ATF+4 as the approved fluid for this transmission. Using fluids outside the ATF+4 specification, such as Dexron VI or Mercon, can lead to shifting issues and potential damage over time. Always verify the exact requirement in the owner's manual or with a dealer if you’re unsure.
Official fluid specification and compatibility
Here is how the official guidance stacks up for the 62TE transmission in the 2013 Chrysler 200.
- Mopar ATF+4 is the primary recommended fluid for the 62TE transmission and meets Chrysler MS9602 specification.
- Fluids that are specifically labeled ATF+4 and meet the MS9602 standard are acceptable alternatives when appropriate, provided they are genuine and clearly rated for Chrysler applications.
- Avoid fluids not approved by Chrysler for this transmission, notably Dexron VI, Mercon, or other ATF types that do not carry the ATF+4/MS9602 specification.
Note: If you are performing a service, use ATF+4 and avoid mixing with other types. When in doubt, consult a dealer or a shop specializing in Chrysler transmissions to ensure you use the correct fluid.
Verification and labeling
To confirm you have the correct fluid, look for packaging that states ATF+4 and MS9602 compliance. Genuine Mopar ATF+4 bottles or fluids explicitly advertised as meeting Chrysler MS9602 are the most reliable options. If the bottle lacks clear MS9602 labeling, choose another product or contact your dealer for confirmation.
Maintenance notes and service tips
Before proceeding with a change or top‑off, keep these guiding points in mind to avoid common mistakes.
- Always use ATF+4 that meets Chrysler MS9602; do not substitute with Dexron VI or Mercon unless a dealer confirms it is approved for your specific vehicle and transmission variant.
- Do not mix different transmission fluids; if you’re performing a drain and fill, completely replace the old fluid with ATF+4 rather than topping up with a different type.
- Follow the vehicle’s service intervals as outlined in the owner’s manual; fluid changes are important for transmission life and shifting performance.
If you are unsure about the service procedure or the exact capacity, consult the owner's manual or a certified technician who has Chrysler tooling and experience with the 62TE transmission.
Summary
For a 2013 Chrysler 200, the correct transmission fluid is Mopar ATF+4, matching Chrysler MS9602 specifications. Do not use Dexron VI or Mercon, and always verify the fluid exactness with the manual or a Chrysler dealer. Following the approved fluid type and service procedures helps ensure smooth shifting and long transmission life.