The 2013 Mazda5 uses R-134a refrigerant.
In more detail, this model year belongs to the era before the widespread adoption of R-1234yf in many new cars. Mazda typically specifies R-134a refrigerant for the A/C system and PAG-based lubrication. For servicing, always verify the exact refrigerant type, lubricant, and charging procedure in the vehicle’s service manual or at a Mazda dealership to avoid mistakes.
Refrigerant type and service considerations
R-134a as the standard refrigerant for this model year
The 2013 Mazda5's air conditioning system is designed for R-134a refrigerant with PAG oil. R-134a remains the standard for this vehicle year and does not require the newer R-1234yf refrigerant.
R-1234yf is not used in this model year
R-1234yf began appearing in later model years and requires different charging equipment and lubrication. Using the wrong refrigerant can damage seals and the compressor and may void warranties.
Servicing tips and required lubricants
Before servicing, you should know the key points about the refrigerant and lubrication for the 2013 Mazda5's A/C system:
- Use refrigerant R-134a only. Do not substitute R-1234yf.
- Use PAG oil compatible with R-134a (PAG-46 is commonly specified for many Mazda vehicles).
- Have the system evacuated and leak-checked, then recharged to the vehicle's specified capacity. Do not overcharge.
- Consult the Mazda service manual or a qualified technician for the exact refrigerant capacity and oil quantity for your vehicle’s VIN.
Following these guidelines helps ensure proper cooling performance and protects the compressor and seals from improper lubrication or over-pressurization.
Where to find official specifications
For the official specifications, refer to the Mazda owner's manual, the factory service manual, or a Mazda dealership. These sources provide exact capacity (in ounces or grams) and oil amount for the 2013 Mazda5, which can vary by market and equipment level.
Summary
In short, the 2013 Mazda5 takes R-134a refrigerant with PAG oil. Do not use R-1234yf for this model year, and always verify exact capacities and lubricant requirements with Mazda’s official manuals or a certified technician to ensure proper operation and warranty compliance.
What kind of coolant does a 2013 Mazda 5 take?
FL22 type coolant
*1 Use FL22 type coolant in vehicles with the inscription “FL22” on the radiator cap itself or the surrounding area. Use FL22 when replacing the coolant.
Does my car use R-134a or R-1234YF?
Cars built mid-1990s to roughly 2014–2017 almost always use R134a. Most 2017–present vehicles, especially Euro, hybrid and EV models, use R-1234yf. Some EVs use specialised refrigerant blends depending on the cooling system. Your car has a sticker under the bonnet that confirms its exact gas type.
What kind of AC coolant is used in Mazda 5?
Air Conditioner
| Item | Specification |
|---|---|
| Refrigerant Type | HFC134a (R-134a) |
What is the most common problem with the Mazda5?
Top Mazda 5 Problems
- Rattling From Front Suspension Due to Worn Sway Bar Bushings.
- Defective Engine Mount May Cause Excessive Vibration/Noise.
- Check Engine Light/Trouble Code Due to Stuck Open Thermostat.
- Rattle From Rear Suspension Due to Loose Stabilizer Bar Links.