The 2023 Nissan Altima uses a cartridge-style oil filter that sits inside a housing, not a traditional spin-on canister. This design applies to both the 2.5-liter four-cylinder and the VC-Turbo 2.0-liter engines. For exact parts and service guidance, consult the owner's manual or a Nissan dealer.
Overview of the filter type
Here is how the Altima’s filter design breaks down by engine option.
- The 2.5L four-cylinder engine uses a cartridge-style oil filter housed in a removable housing; you replace the cartridge, not a screw-on canister.
- The 2.0L VC-Turbo engine also uses a cartridge-style oil filter in a housing; service involves replacing the cartridge rather than a spin-on unit.
In both cases, routine maintenance involves replacing the filter cartridge and any required O-rings during an oil change, rather than swapping out a traditional canister filter.
How to replace the oil filter on a 2023 Altima
Before performing an oil change, be prepared with the right parts and procedure. The following steps outline the typical process, but always verify engine-specific details in the service manual or with a Nissan dealer.
- Gather supplies: new cartridge oil filter kit, fresh 0W-20 synthetic oil, an oil drain pan, a torque wrench, and replacement O-rings for the filter housing.
- Drain the old oil and remove the filter housing cap to access the cartridge.
- Remove and discard the old cartridge and O-rings; clean the inside of the housing and cap surfaces.
- Install the new cartridge filter and O-rings, reseal the housing cap, and torque to the manufacturer’s specification.
- Refill with the recommended oil, check for leaks, and reset the oil-change indicator if equipped.
Different engine variants may have slightly different steps or torque values. Always refer to the official service manual or dealership guidance for your specific configuration.
Oil type and capacity
For the 2023 Altima, use a high-quality 0W-20 synthetic oil that meets current Nissan specifications. The exact oil capacity varies by engine and configuration, so consult the owner’s manual or a dealer to confirm the precise amount required for your vehicle.
Note: The filter kit part numbers can differ by engine type (2.5L vs. 2.0L VC-Turbo). Check the VIN and consult Nissan Parts or a dealership to obtain the correct cartridge filter kit for your exact model.
Where to source parts and how to verify compatibility
Part numbers and availability depend on your engine variant and production run. To ensure you purchase the right cartridge filter kit, verify your engine code and VIN with Nissan Parts or your dealership. The dealer can provide the exact Nissan Genuine Oil Filter cartridge kit recommended for your 2023 Altima’s engine.
Because parts catalogs can change and service bulletins update, rely on official sources for the most accurate information. This approach helps prevent installing an incompatible filter cartridge or O-rings.
Summary
The 2023 Nissan Altima relies on a cartridge-style oil filter inside a housing for both the 2.5L and 2.0L VC-Turbo engines. You replace the cartridge and O-rings during service, not a traditional spin-on canister. Use 0W-20 synthetic oil and obtain the correct cartridge filter kit from Nissan Parts or a dealership, confirming part numbers and engine configuration for your vehicle. Always consult the owner’s manual or a Nissan service professional for precise guidance.