The 2015 Town & Country with the 3.6L Pentastar V6 typically requires a full-synthetic oil that meets Chrysler's MS-6395 specification, with 0W-20 as the default viscosity. Some climates or dealer guidance may permit 5W-20 as an acceptable alternative. Always verify the exact requirement in your owner’s manual or on the under-hood oil label.
In this article, we explain the oil type, viscosity options, and how to verify the correct specification for the 2015 Town & Country, along with practical tips for selecting oil and maintaining your minivan's engine health.
Oil type and specification
Before we list the options, note that the core requirement is a synthetic oil that meets Chrysler MS-6395. The exact viscosity can vary by climate and model year; the following options cover typical guidance for the 2015 Town & Country.
- Viscosity and oil type: Primary recommendation is 0W-20 synthetic oil that meets Chrysler MS-6395. This viscosity supports fuel economy and cold-weather performance.
- Alternative viscosity: In warmer climates or when specified by the owner’s manual, 5W-20 synthetic oil may be acceptable as an alternative.
- Oil specification: Choose an oil that meets Chrysler MS-6395 and API SN (or newer) as well as ILSAC GF-5 compatibility. Brand is flexible as long as the oil meets these specs; many retailers label products accordingly.
In summary, select a synthetic (or high-quality synthetic blend) that meets MS-6395, with 0W-20 as the default and 5W-20 as a climate-dependent option when specified by the manual.
How to verify the correct oil for your vehicle
The correct oil is confirmed by your owner’s manual, the under-hood oil fill cap, and the service label inside the glovebox or door jamb. If you’re uncertain, consult a Chrysler dealer or an experienced technician to confirm the current specification for your vehicle, given your climate and driving conditions.
Practical steps to ensure compliance
Check the owner’s manual for the exact viscosity and MS-6395 specification, look for the MS-6395 designation on oil bottles, and read the label under the hood near the fill cap. When in doubt, ask a professional to confirm before an oil change.
Summary
The 2015 Town & Country generally calls for a full-synthetic 0W-20 oil that meets Chrysler MS-6395, with 5W-20 offered as a climate-based alternative per the manual. Always verify the exact requirement for your vehicle and region by consulting the owner’s manual or a dealer.
Is 5W-20 or 5W-30 better for high mileage?
Key Differences: 5W30 vs 5W20
5W30 offers better high-temperature protection. It's great for towing, highway driving, or older engines, especially for drivers in Frandor and Lansing who use their vehicles for more than just errands. 5W20 is thinner and generally suited for newer engines that prioritize efficiency.
What kind of oil does a Town & Country Chrysler Minivan take?
Mobil 1 – High Mileage 5W-30 Full Synthetic Motor Oil, Protection For 10K Miles, 5 Quart (Part No. 120769)
What kind of oil goes in a 2015 Chrysler Town and Country?
Oil Grade: SEO11
| Viscosity: | 5W-20 (All TEMPS) |
|---|---|
| Capacity: | 5.9 quarts (with filter). After refill check oil level. |
| Torque: | 20 ft/lbs (Oil Drain Plug) |
How much oil does a 2015 Chrysler Town and Country 3.6 L take?
approximately 6.0 quarts
The 3.6L V6 in the 2015 Town and Country typically requires approximately 6.0 quarts of oil with filter change—our technicians confirm exact capacity and top off to factory specifications.