The 2016 Honda Accord uses a cartridge-style oil filter, not a traditional spin-on canister. Fram offers cartridge filters that fit Honda engines, including the Accord’s 2.4-liter inline-four and 3.5-liter V6. To be sure you get the correct part, check Fram’s compatibility listings and your vehicle’s owner’s manual for the exact part number.
Understanding the filter type
Honda’s 2016 Accord engines employ a cartridge oil filter housed in a dedicated housing. Fram manufactures cartridge-style filters designed to fit Honda engines, so you’ll be selecting a cartridge rather than a spin-on canister. When you replace the filter, you’ll swap only the filter element and the O-ring seal, inside the housing.
How to determine the correct Fram part
To ensure you pick the right Fram cartridge filter for your Accord, start with your engine type and trim level, then cross-check with Fram’s official catalog or a trusted parts retailer. Use your VIN if you’re shopping online and reference the "cartridge oil filter" category that lists Honda compatibility. Also confirm the recommended oil viscosity (0W-20 is common for 2016 Accords) in your owner’s manual.
Before you buy, consider these steps to verify compatibility:
- Identify your engine: 2.4L I4 or 3.5L V6 (the base and many trims use the 2.4L; higher trims may use the V6).
- Check Fram’s official cross-reference for Honda Accord compatibility with the engine size and model year.
- Confirm the filter is a cartridge-type designed for Honda engines, not a traditional spin-on filter.
- Validate the oil capacity and oil grade recommended for your vehicle.
By following these checks, you’ll ensure you purchase the correct Fram cartridge filter for your 2016 Accord.
Installation and verification
When installing, follow the service manual: replace the O-ring, install the new cartridge in the housing, and torque the housing cap to the specified value. Refill with the correct oil and start the engine to check for leaks. If you’re unsure, consult a mechanic or a parts counter specialist with your VIN ready.
Summary
The 2016 Honda Accord uses a cartridge-type oil filter located in an oil filter housing. Fram sells compatible cartridge filters for Honda engines, but the exact Fram part number depends on whether your Accord uses the 2.4L I4 or the 3.5L V6. Verify compatibility with Fram’s catalog or your parts retailer by engine size, trim, and VIN, and always follow the vehicle’s oil specification in the owner’s manual.