Many modern Honda models offer reverse-tilt mirrors that automatically angle downward when you shift into reverse to help you see the curb and lines. The feature is optional and may be available only on certain trims. Here’s how to enable it and what to do if you can’t find the option.
What you need to know about reverse tilt mirrors
Reverse tilt mirrors are designed to improve visibility while backing up at low speeds. Availability and exact menu labels vary by model year and trim, so the steps below describe common paths across recent Hondas. If your car doesn’t show these options, your trim may not support the feature.
To enable reverse tilt mirrors, you typically access the vehicle’s settings through the touchscreen or instrument cluster and adjust the Mirror or Vehicle settings. The steps below summarize the process.
- Turn on the ignition and access the vehicle’s settings via the touchscreen or instrument cluster.
- Navigate to the Mirror or Vehicle Settings section (look for "Mirror," "Mirror Settings," "Reverse Tilt," or "Auto Tilt").
- Enable "Reverse Tilt" or "Reverse Tilt Down" for the desired mirrors (driver, passenger, or both).
- Exit the menu and test by shifting into reverse at a slow speed to confirm the mirrors tilt downward.
Enabling reverse tilt mirrors is straightforward on most newer Hondas, but some trims or regions may not support it. If you can’t find the option, consult your owner’s manual or contact a Honda dealer to confirm compatibility for your exact model and year.
Model-specific notes
Since interfaces can differ by year and infotainment system, use these as general guidelines and check your manual for exact wording.
- Newer Honda sedans (like the Civic and Accord) with updated infotainment typically list "Reverse Tilt" or "Auto Tilt" under Settings > Vehicle > Mirror.
- Crossovers and SUVs (CR-V, HR-V, Pilot) often place mirror tilt options under Settings > Vehicle > Mirrors or Settings > Camera & Mirror.
- Some older i-MID/Display Audio systems place the option in Settings > Vehicle > Mirror, and lower trims may not offer this feature.
If you confirm compatibility but still can’t enable it, try a software update or consult a dealer. In some cases, the feature depends on the trim level or option package, and enabling it may require specific hardware or firmware.
Testing and adjustments
Once enabled, test the feature to ensure it works as expected. Adjust your seating position if needed, as the tilt range can depend on driver height and seat angle. If you want visibility on both sides, enable for both mirrors if the option is available.
- Park the car, shift to Reverse at a slow speed, and watch whether the mirrors tilt downward briefly.
- If the tilt does not activate, double-check the setting and try again with the ignition on.
- If it still doesn’t work, verify you selected the correct mirrors in the menu and that the feature is not disabled by a separate car-wide setting (e.g., a master mirror switch).
Remember that not all drivers will use reverse tilt mirrors daily; knowing where this setting lives can save time and improve parking safety for those who rely on it.
Summary
Reverse tilt mirrors can enhance rearward visibility during backing, but availability depends on model year and trim. If your Honda supports it, enable the option in Settings > Vehicle or Mirror settings, select the mirrors to tilt, and test by reversing at low speed. If the feature isn’t available for your car, manual mirror adjustment or alternative visibility aids remain your best options.
Notes and tips
Always refer to your owner’s manual for model-specific instructions, as wording and locations can vary by year and market. If in doubt, contact a Honda dealer or service center for guidance about your exact vehicle configuration.