The 2008 Honda Element uses a standard spin-on oil filter designed for its 2.4-liter four-cylinder engine. The typical OEM filter is Honda part number 15400-PLM-A01, with 15400-PLM-A02 used in some production runs. Always verify with your VIN or the filter currently installed to be certain.
To understand what this means in practice, it helps to know the engine layout and how Honda formats its filter part numbers. The Element from this era is equipped with a 2.4L inline-four engine from Honda’s K-series family, which uses a conventional spin-on oil filter that’s easy to replace during routine maintenance.
OEM oil filter options for the 2008 Element
Below are the typical Honda OEM options that have been used on 2008 Elements. These cover the most common builds, but VIN-specific variants can exist, so it’s best to double-check the part number on the filter you remove or consult your vehicle’s VIN.
- 15400-PLM-A01
- 15400-PLM-A02
These two part numbers account for the majority of 2008 Element vehicles. If you want to be certain, check the filter you’re replacing or consult a Honda dealer with your VIN to confirm the exact OEM specification.
Summary
In short, the 2008 Honda Element uses a standard spin-on oil filter for its 2.4L engine. The common OEM options are 15400-PLM-A01 and, in some cases, 15400-PLM-A02. Confirm the exact part number by inspecting the old filter or referencing your VIN, then replace with a filter rated for Honda 2.4L engines during oil changes.