The 2006 Honda CR-V uses a conventional spin-on oil filter for its 2.4-liter four-cylinder engine. Use a Honda genuine filter (typically 15400-PLM-A01; some production runs use 15400-PLM-A02) or a compatible aftermarket filter designed for Honda's 2.4L engines.
Understanding the filter type and engine context
In North American 2006 CR-Vs, the vehicle is powered by a 2.4-liter i-VTEC four-cylinder engine. The oil filter is a standard spin-on canister-type unit, not a cartridge-style filter. When shopping, look for filters that explicitly state compatibility with Honda’s 2.4L four-cylinder engines from the early 2000s to mid-2000s, and verify fitment for the CR-V’s specific production year.
Recommended options
Below are practical options that typically fit the 2002–2006 CR-V with the 2.4L engine. Always confirm compatibility with your exact VIN or by cross-referencing your engine code.
- Honda Genuine oil filter: 15400-PLM-A01. This is the standard filter used on many 2.4L Honda engines from this era; some production runs also use 15400-PLM-A02.
- Aftermarket filters labeled for Honda 2.4L four-cylinder engines. Choose reputable brands and ensure the filter is specified for a 2.4L Honda engine to guarantee proper threading, gasket size, and filtration capacity.
- When in doubt, have your vehicle’s VIN checked at a parts counter or online catalog to confirm the correct filter cross-reference for your exact build.
Concluding: Selecting a filter designed for Honda’s 2.4L engines—whether OEM or a trusted aftermarket equivalent—helps ensure proper fit and filtration for the CR-V’s engine.
How to replace the filter (brief guidance)
If you're performing an oil change yourself, follow these basic steps to replace the filter safely:
- Warm up the engine, then park on a level surface and place a drain pan beneath the oil sump.
- Remove the drain plug to drain the used oil, and replace the washer if needed.
- Using an oil filter wrench, loosen and remove the old spin-on filter; allow any remaining oil to drain.
- Prepare the new filter with a light coating of fresh engine oil on the gasket, then thread it on by hand until snug. Do not overtighten.
- Reinstall the drain plug, refill the engine with the recommended oil volume and viscosity, start the engine, and check for leaks around the filter and drain plug.
Concluding: Proper installation of the new filter and correct oil specification are essential for engine longevity and performance.
Summary
The 2006 Honda CR-V uses a standard spin-on oil filter for its 2.4L four-cylinder engine. Honda genuine options such as 15400-PLM-A01 (and occasionally -A02) are reliable, with many reputable aftermarket filters also offering compatible performance. Always verify compatibility with your exact vehicle configuration via the owner's manual, VIN, or a trusted parts supplier. This approach ensures you choose the right filter for your CR-V and maintain optimal engine protection.