The 2002 Honda Civic uses a standard spin-on oil filter designed for Honda’s D-series engines. The exact part number can vary by engine variant and market, with common Honda part numbers including 15400-PLM-003 or 15400-PLM-004.
Filter type and engine coverage
Most US-spec Civics in 2002 run a 1.7-liter D-series engine. Regardless of the specific variant, the oil filter is a spin-on unit with a standard 3/4-16 thread fitting. This means you’ll replace the entire cannister-type filter rather than a cartridge.
Engine variants
The Civic lineup for that year mostly used the D-series family, typically either non-VTEC or mild-VTEC configurations. While the exact engine code can shift by trim and region, the filter type remains the same: a spin-on filter that screws onto a threaded mounting.
Common Honda part numbers used on 2002 Civics in the United States include the following. Verify the correct one for your specific car by checking the current filter, your service manual, or a parts lookup for your VIN.
- 15400-PLM-003
- 15400-PLM-004
If your vehicle is outside the US or uses a different market specification, the exact number may differ. Always confirm with a parts catalog or your dealer to ensure compatibility with your engine code.
Verifying the correct filter and replacement tips
To ensure you buy the right filter, use this quick confirmation process and follow best practices when replacing it. The plan below helps you avoid mismatches and leaks.
- Check the current filter for its part number and model. If readable, use that number to locate the replacement.
- Consult your vehicle’s VIN-based parts lookup (dealer or reputable online catalogs) to confirm compatibility with your exact engine code and market.
- Ensure any aftermarket filter you choose is a spin-on type with a 3/4-16 thread that matches Honda’s mounting threads.
After selecting the correct filter, follow standard replacement steps: warm the engine, place a drain pan, remove the old filter (watch for oil), install the new filter hand-tight then snug, and finally refill with the recommended oil and check for leaks.
Summary
For a 2002 Honda Civic, expect a standard spin-on oil filter designed for the D-series engines. The typical OEM numbers cited are 15400-PLM-003 or 15400-PLM-004, though exact part numbers can vary by engine variant and market. Always verify with the current filter, service manual, or a VIN-based parts lookup to ensure proper fit before purchasing or installing.