The 2017 Honda Accord Sport with the 2.4L engine uses 0W-20 synthetic motor oil, with a capacity of roughly 4.4 to 4.5 quarts (about 4.2 to 4.3 liters) when changing the oil and filter. Use a full-synthetic oil that meets or exceeds API SN/SN+ and Honda’s specifications.
Oil type and capacity
Understanding the exact oil you need helps ensure proper engine protection and warranty compliance. The 2.4L inline-4 engine used in the 2017 Accord Sport is designed for 0W-20 synthetic motor oil. This grade provides good cold-start performance and long-term protection across typical driving conditions. The engine oil capacity, including a new filter, is about 4.4–4.5 quarts (approximately 4.2–4.3 liters).
Before assembling your oil-change kit, it’s helpful to know exactly what you’ll need. The following list covers the essentials to complete a typical oil change on this model.
- 0W-20 synthetic motor oil (brand is up to you, but ensure it meets API SN/SN+ or newer and Honda specifications).
- New oil filter compatible with the 2.4L i-VTEC engine.
- Oil drain pan, funnel, and rags for cleanup.
- Optional drain plug washer if your vehicle requires it.
- Torque-safe tools or a wrench for the drain plug and a filter wrench if needed.
With the correct oil grade and a fresh filter, you’re ready to perform a standard oil change and help ensure the engine runs smoothly.
Maintenance steps and best practices
Following a proper oil-change procedure helps maintain engine health and reliability. The steps below reflect common practice for a 2017 Accord Sport equipped with the 2.4L engine and synthetic oil.
- Warm the engine for a few minutes, then park on a level surface and turn off the engine.
- Place the drain pan underneath the oil pan, remove the drain plug, and let the old oil drain completely.
- Remove and replace the oil filter with a new one designed for your engine.
- Reinstall the drain plug and tighten to the manufacturer’s specified torque (consult the manual or a service guide if unsure).
- Pour in the new oil gradually, checking the level with the dipstick as you go to avoid overfilling.
- Run the engine, check for leaks, and then recheck the oil level after a brief idle. Reset maintenance minder if applicable.
Remember to dispose of used oil and the old filter at an approved recycling facility. Regular oil changes with the proper oil type help preserve engine efficiency and longevity.
Engine variants and notes for broader context
Different engines or trims
The 2017 Honda Accord lineup includes two main engine options: the 2.4L inline-4 that powers the Accord Sport and several other trims, and the 3.5L V6 offered in higher-end variants. The oil specification can vary by engine, so if your specific vehicle has a different powertrain, consult the owner's manual or a Honda service bulletin to confirm the correct oil grade and capacity. For the 2.4L engine in the Accord Sport, 0W-20 full synthetic is the standard recommendation.
Summary
For a 2017 Honda Accord Sport, use 0W-20 synthetic motor oil, in about 4.4–4.5 quarts with a new filter. Ensure the oil meets API SN/SN+ and Honda specifications, and follow a typical oil-change interval of roughly every 7,500 miles under normal driving conditions. If you have a different engine option or trim, verify the correct oil specification in the owner’s manual to avoid compatibility issues.