The 2010 Honda Accord's rim size varies by trim and body style. In practice, base LX sedans use 16-inch rims, while EX and EX-L trims use 17-inch rims; Coupes follow the same pattern. Always verify the exact size on your car via the door placard or owner's manual.
Wheel sizes by trim and body style
Here is a concise guide to the typical factory wheel sizes you would find on a 2010 Accord, noting that there are variations depending on market and optional packages.
- Sedan: LX/LX-P — 16-inch rims
- Sedan: EX/EX-L — 17-inch rims
- Coupe: LX-S — 16-inch rims
- Coupe: EX/EX-L — 17-inch rims
In summary, base models use 16-inch wheels while higher-trim models use 17-inch wheels; wheel options can vary, so verify for your exact vehicle.
How to verify your exact wheel size
Use these steps to confirm your precise wheel size on your specific 2010 Accord, especially if you’re shopping for replacement rims or tires.
- Check the driver's door jamb placard, which lists the tire size and the corresponding wheel diameter (for example, 205/60R16 indicates 16-inch wheels).
- Consult the owner's manual or a build sheet for your trim to confirm the factory specification.
- Inspect the wheel or tire sidewall for the "R" number, which indicates the wheel diameter in inches (R16, R17, etc.).
- If purchasing aftermarket rims, verify the bolt pattern (5-lug) and offset to ensure proper fitment on the 2010 Accord (usually 5x114.3 mm with a center bore of 64.1 mm).
Note: Wheel size can vary by regional market and optional packages, so always double-check with official sources for your exact VIN.
Wheel fit and bolt-pattern basics
Understanding fitment helps prevent mismatches and clearance issues when replacing rims.
- Most 2010 Honda Accords use a 5-lug bolt pattern; common reference is 5x114.3 mm.
- Center bore is typically 64.1 mm, but verify for your specific wheel.
- Offsets vary by wheel design; common factory offsets are in the mid-40s to mid-50s mm range and affect compatibility with suspension clearance and alignment.
Always confirm with a reliable spec sheet or dealership before purchasing wheels.
Summary: The 2010 Honda Accord’s rim sizes are not singular; base trims use 16-inch rims and higher trims use 17-inch rims, with variations by body style and market. Verify on the door placard or manual and check bolt pattern/offset when shopping for replacements.