The 2019 Honda Accord uses SAE 0W-20 full‑synthetic engine oil for both the 1.5‑liter turbo and the 2.0‑liter turbo engines.
The oil should meet API service classification SN or newer and ILSAC GF‑5 specifications. Honda recommends Honda Genuine Motor Oil, but any brand that meets these specs is acceptable. Oil-change intervals are guided by the vehicle’s maintenance minder and driving conditions, typically around 7,500 miles under normal use.
Oil type and viscosity
To ensure optimal performance and compatibility across the Accord’s common engine options, Honda specifies a single viscosity and compatible standards. This section breaks down the official requirements for 2019 models.
- 0W-20 full synthetic engine oil (preferred for all 2019 Accord engines).
- Oil must meet API SN or newer and ILSAC GF-5 standards; Honda Genuine Motor Oil is recommended, but other brands meeting these specs are acceptable.
Sticking with 0W-20 full synthetic helps maximize fuel efficiency, cold-start protection, and emissions performance. If you’re unsure about the exact specification for your vehicle, check the owner’s manual or consult a dealer.
Oil capacity and change intervals
Oil capacity varies by engine option, and maintenance intervals are influenced by driving conditions and the vehicle’s maintenance minder system.
- Oil capacity (approximate, including filter): 1.5L turbo engine about 4.5 quarts; 2.0L turbo engine about 5.7 quarts.
- Recommended change interval: typically every 7,500 miles under normal driving with 0W-20 full synthetic, though the maintenance minder may indicate sooner; severe driving conditions can shorten the interval to around 5,000 miles.
Use the maintenance minder as your guide, and adjust for climate, short trips, or heavy use. Always verify exact capacity and interval in the owner’s manual for your trim and region.
Practical tips for selecting oil
Choosing the right oil and staying on schedule can be straightforward if you follow these practical tips. The notes below complement the official specifications.
- Choose a brand that explicitly meets API SN or newer and ILSAC GF‑5, with viscosity 0W‑20.
- Consider using Honda Genuine Motor Oil for compatibility and warranty considerations, though many reputable brands that meet the specs are acceptable.
- Always reset or follow the maintenance minder after an oil change and check the dipstick level if you notice low oil.
Adhering to these guidelines helps maintain engine protection, efficiency, and resale value, while keeping you aligned with Honda’s recommended service intervals.
Summary
In summary, the 2019 Honda Accord requires 0W-20 full‑synthetic oil that meets API SN (or newer) and ILSAC GF-5 specifications. Use Honda Genuine Motor Oil or any brand that meets these specs. Oil capacity ranges from about 4.5 quarts on the 1.5L engine to about 5.7 quarts on the 2.0L engine, with a typical change interval around 7,500 miles in normal conditions (sooner if the driving is severe). Always refer to the owner’s manual and the maintenance minder for precise guidance.