For most Dodge Durango GT models, the engine oil you use depends on the installed engine. The common 3.6L Pentastar V6 normally calls for 0W-20 full synthetic oil, while the optional 5.7L Hemi V8 typically uses 5W-20 (with 5W-30 acceptable in very hot climates or under heavy use). Always verify the exact specification for your year and engine in the owner’s manual or on the under-hood oil label.
Engine options and oil recommendations
The Durango GT has appeared with two main engines across its production years. The following guidance reflects the typical choices you’ll encounter.
- 3.6L Pentastar V6 (the most common Durango GT engine): Use 0W-20 full-synthetic oil that meets Chrysler MS-6395 specification. Approximate capacity is about 5 quarts, plus a filter.
- 5.7L Hemi V8 (available on some GT configurations): Use 5W-20 full-synthetic oil, with 5W-30 acceptable in hot climates or under heavy use. Oil capacity is around 7 quarts, plus a filter. Always confirm the exact spec for your year and configuration in the manual.
- Note about variations: Depending on year and regional guidelines, some models may show alternative viscosities. When in doubt, follow the oil specification printed on the vehicle’s label or the owner's manual.
In short, engine choice dictates the oil viscosity: 0W-20 for the 3.6L Durango GT, and 5W-20 (or 5W-30 in certain conditions) for any 5.7L variant. Always verify with the official manual for your exact vehicle.
How to confirm the correct oil for your Durango GT
If you’re unsure which engine your Durango GT has or want to double-check the oil specification, use these steps.
- Consult the owner’s manual: The Specifications or Maintenance sections list the exact viscosity and oil spec required for your engine and year.
- Check the oil fill cap and under-hood label: They often show the recommended viscosity and sometimes the required oil spec.
- Look at the door jamb sticker: It may indicate the recommended oil viscosity for the vehicle when new.
- Ask a dealer or trusted mechanic: If the vehicle has an unusual configuration or you’re unsure about a swap, professional confirmation is wise.
Using the wrong viscosity can affect lubrication, fuel economy, and engine wear. If in doubt, choose a high-quality full synthetic oil that meets the Chrysler MS-6395 specification and the viscosity advised for your engine and climate.
Summary
For most Dodge Durango GT models with the 3.6L Pentastar, the recommended oil is 0W-20 full synthetic. If the GT has the 5.7L Hemi, the recommended oil is typically 5W-20, with 5W-30 acceptable in hot climates or under heavy use. Always confirm the exact specification in the owner’s manual or on the vehicle’s oil label, as engine options and climate considerations can vary by year.
What oil does a Dodge Durango GT take?
6 Liters of Fully Synthetic Eurol Evolence 0W20 Motor Oil - Meets or exceeds the recommended Chrysler MS-6395 oil quality specification and performance characteristics required for the Dodge Durango 3.6L V6 engine.
What Dodge SUV do police use?
Durango Pursuit
The Durango Pursuit is loaded with features to make officers' jobs easier, reducing fatigue and keeping decision-making skills sharp. Tons of front seat space makes it a comfortable place to be for hours on end, as well as easy to get in and out of in a hurry.
Can I use 5W-30 instead of 5W20 in my Dodge?
Using 5W-30 instead can reduce fuel economy and impede flow throughout the engine. While using it temporarily in a pinch likely won't cause your engine lasting harm, remember that the engineers who built your engine did so with a specific viscosity oil in mind, meaning it's best to stick with it.
What oil does a 2020 Dodge Durango GT take?
AMSOIL OE 0W-20 100% Synthetic Motor Oil.