The 2022 Chrysler Pacifica requires 0W-20 synthetic motor oil that meets Chrysler’s MS-6395 specification, with roughly 5 quarts (about 4.7 liters) needed for a full oil and filter change.
Official oil specification for the Pacifica
The Pacifica’s 3.6L Pentastar V6 is designed to run on a compliant 0W-20 synthetic oil. The key requirements are the viscosity (0W-20) and the engine oil specification (MS-6395) that ensures compatibility with Chrysler’s lubrication system and warranty terms. Use a full synthetic oil to maximize protection and performance.
Before following the maintenance steps below, it’s important to understand the exact spec for your vehicle, which can vary by market or model year. Always verify with the owner’s manual or your dealer if you’re unsure.
- 0W-20 synthetic motor oil that meets Chrysler MS-6395 specification
- Full synthetic recommended for best protection; avoid conventional or low-quality blends
- Oil capacity with filter change is about 5 quarts (4.7 liters)
Adhering to these requirements helps maintain engine protection, performance, and warranty coverage.
How to verify the spec on your Pacifica
Consult the owner’s manual, check the under-hood oil cap, and look for the service label in the engine bay, which typically indicate 0W-20 and MS-6395. If in doubt, contact a Chrysler dealer or certified mechanic for confirmation before purchasing oil.
Practical notes for maintenance decisions
In addition to the correct oil grade, consider sticking to a full synthetic 0W-20 and ensuring the oil change is performed with a compatible filter. This combination supports cold-weather starting, fuel efficiency, and long-term engine durability.
Summary
For a 2022 Chrysler Pacifica, the recommended oil is 0W-20 synthetic that meets Chrysler MS-6395, with an approximate capacity of 5 quarts (4.7 liters) for a typical oil and filter change. Always confirm the exact specification in your owner’s manual or with a dealer, and use a high-quality full synthetic that meets the MS-6395 standard.