The 2019 Nissan Frontier uses SAE 5W-30 full-synthetic motor oil.
The 2019 Frontier, which comes with the 4.0-liter V6, requires 5W-30 full-synthetic engine oil that meets API SN (or newer) standards. For a full oil change, you’ll typically replace the filter and fill with about 5.5 quarts, though you should verify the exact capacity and specification in your owner's manual or with a Nissan dealer because details can vary by market and trim.
Oil specifications for the 2019 Frontier
Key specifications to guide your oil choice include viscosity, type, and certification, plus a note on capacity.
- Viscosity: SAE 5W-30
- Oil type: Full-synthetic engine oil (synthetic or synthetic-blend oils that meet the spec are acceptable; full synthetic is preferred)
- Certification: API SN or newer (ILSAC GF-5 or newer is commonly acceptable)
- Capacity: Approximately 5.5 quarts with oil filter for a typical 4.0L V6 engine
- Brand options: Nissan Genuine Motor Oil 5W-30 or any reputable brand that meets API SN or newer and 5W-30 viscosity
Using the correct viscosity and certified oil helps protect the 4.0L V6 and supports reliable performance. Always confirm the exact specification for your VIN in the owner's manual or with a Nissan service advisor.
Maintenance tips and intervals
Oil change intervals and maintenance details can vary based on driving conditions. The following outline provides a general approach, but always follow the official schedule in your manual or from Nissan.
- Oil capacity and change: Plan for about 5.5 quarts with filter; use the recommended 5W-30 full-synthetic oil.
- Quality and certification: Choose oil that meets API SN or newer and 5W-30 viscosity; Nissan Genuine Oil is one reliable option.
- Filter replacement: Always replace the oil filter with every oil change.
- Oil level check: After a fresh fill, run the engine briefly, then recheck the level with the dipstick to ensure it’s within the correct range.
Adhering to these maintenance steps helps keep the Frontier’s engine properly lubricated and performing well over time.
Summary
For the 2019 Nissan Frontier, use SAE 5W-30 full-synthetic engine oil that meets API SN or newer standards, with an approximate capacity of 5.5 quarts including the filter. Always consult the owner's manual or a Nissan dealer for the exact specification and maintenance intervals tailored to your vehicle and region.
Does a Nissan Frontier need synthetic oil?
Because synthetic oil is recommended as the Nissan Frontier oil, you should get a Nissan Frontier oil change every 7,500 to 15,000 miles, or once a year. Regular oil changes are vital for the health of your Nissan Frontier. Over time, oil breaks down and loses its effectiveness, which can lead to engine damage.
How many quarts of oil does a 2019 Nissan Frontier 4.0 L take?
5.4 quarts
5.4 quarts (with filter). After refill check oil level.
What oil is recommended for a 2019 Nissan Frontier?
The recommended Nissan Frontier oil type is genuine Nissan 0W-20 SP full-synthetic oil. However, synthetic 0W-20 SP GF-6A motor oil will also work in a pinch.
What oil does a 4.0 V6 Nissan Frontier take?
To reiterate, 5W30 full-synthetic oil is the recommended Nissan Frontier oil type.