The 2019 Mitsubishi Mirage requires a low-viscosity engine oil, specifically 0W-20, in full synthetic or synthetic-blend form. It should meet API SN or newer and ILSAC GF-5 or GF-6 specifications, with an approximate oil capacity of 3.0 quarts (2.9 liters) including the filter. Always verify exact requirements in the owner's manual or on the oil filler cap for your market.
Oil grade and specifications
The Mirage's 1.2-liter three-cylinder engine is tuned for efficiency, so the factory-recommended oil emphasizes smooth starting and reduced friction. Using a 0W-20 oil helps with cold-start protection and fuel economy. Use oil that meets the specified API/ILSAC standards to maintain warranty coverage and engine longevity.
Here are the core oil specifications to follow when servicing a 2019 Mirage:
- Viscosity: 0W-20
- Oil type: Full synthetic recommended; synthetic-blend acceptable if necessary
- Certification: API SN or newer; ILSAC GF-5 or GF-6
- Capacity: Approximately 3.0 quarts (2.9 liters) with filter
Bottom line: Use 0W-20 synthetic or synthetic-blend oil meeting API SN or newer and ILSAC GF-5 or GF-6, with about 3.0 quarts capacity. Always consult your manual for the exact figure and interval for your market.
Market notes and maintenance tips
Oil requirements can vary by region, climate, and model year; always verify with the owner's manual or a Mitsubishi dealer. Regular oil changes with the recommended grade help preserve efficiency and engine life.
Summary
For a 2019 Mitsubishi Mirage, the recommended oil is 0W-20, preferably full synthetic or synthetic-blend, meeting API SN or newer and ILSAC GF-5/ GF-6, with a typical capacity of about 3.0 quarts with a filter. Always confirm the exact specification in the official manual or on the oil filler cap.