The 2018 Audi 2.0 TFSI (EA888) commonly uses a full-synthetic 0W-20 oil that meets Volkswagen’s VW 502.00 specification. This combination is chosen to optimize fuel efficiency, cold-start performance, and emissions compliance. Always verify the exact requirement in your vehicle’s owner’s manual or with an Audi dealer for your region.
Oil grade and the official specification
Understanding the official specification helps ensure you select the correct oil for this engine. The 2018 2.0 TFSI in many Audi models is designed to run on a 0W-20 synthetic oil that meets the VW Group standard 502.00. This specification is intended to provide proper protection across a wide range of operating conditions.
Notes before the list: The following options reflect the standard guidance for most 2018 A4 and related models. Always confirm the exact requirement from your car’s documentation or service advisor.
- Viscosity and grade: 0W-20 synthetic oil
- Specification: VW 502.00 (oil must be manufactured to this standard)
- Oil type: Full synthetic (not mineral or semi-synthetic)
- Capacity: Approximately 4.5 liters (about 4.7 quarts) including the filter
These specifications cover the typical configuration for the 2.0 TFSI found in the 2018 model year. Availability of alternate viscosities or specifications may exist in certain regions or for specific engine codes, so always cross-check the owner’s manual or with a dealer.
Maintenance notes and practical tips
Using the correct oil is essential for engine longevity and performance. Choose a reputable brand that explicitly states VW 502.00 compliance and 0W-20 viscosity to ensure compatibility with the engine’s tolerances and emission controls.
Brand and product examples
Common choices among owners include fully synthetic 0W-20 options from brands such as Castrol EDGE 0W-20, Liqui Moly Special Tec 0W-20, Mobil 1 0W-20, and other manufacturers that clearly advertise VW 502.00 compliance. When shopping, always verify the label for VW 502.00 and 0W-20 compatibility.
If you’re unsure, consult your Audi service advisor or refer to your owner’s manual to confirm the exact specification required for your specific engine code and market.
Oil capacity and change intervals (general guidance)
Typical oil capacity for the 2018 2.0 TFSI engine, including the filter, is around 4.5 liters. Oil-change intervals can vary by market and service plan (normal vs. long-life). Always follow the maintenance schedule printed in your owner’s manual or provided by your dealer.
Summary
The 2018 Audi 2.0 TFSI generally takes a full-synthetic 0W-20 oil that meets VW 502.00 specification, with an approximate capacity of 4.5 liters including the filter. Always double-check your exact engine code and regional requirements in the owner’s manual or with an Audi dealer, and select a reputable brand that clearly lists VW 502.00 compliance.
What type of oil does a 2018 Audi A6 2.0 T take?
Advanced Eurol Syndura 5W40 fully synthetic oil meets or exceeds the VW 502 00 oil specification recommended for the 2016, 2017, and 2018 Audi A6 2.0T gasoline engine.
Is 5W-30 ok for Audi?
Oil Viscosity Recommendations
SAE 5W-30: Ideal for a wide range of temperatures and common for most Audi engines. SAE 5W-40: Provides additional protection in warmer climates or for turbocharged engines. SAE 0W-30: Suitable for cold weather and newer Audi models with advanced engines.
How much oil does a 2018 2.0 T take?
5.1 quarts
Capacity: 5.1 quarts (with filter). After refill check oil level.
What kind of oil does a 2018 Audi 2.0 take?
5W-40
6 liters 5W-40 Audi A4 motor oil, oil filter, and hardware for 2.0T 16V 4 cylinder applications. Fits 2017-2018 Audi A4 2.0T engine code CYMC non B-cycle. Also fits all 2017-2018 Audi A4 Allroad models.