The 2017 Nissan Rogue SV uses 0W-20 full-synthetic engine oil.
For the Rogue's 2.5-liter four-cylinder engine, Nissan specifies the use of 0W-20 full-synthetic oil that meets API SN (or newer) standards and ILSAC GF-5. The typical oil capacity with a filter is about 4.8 quarts (4.5 liters). Always consult the owner's manual or a Nissan dealer to confirm the exact specification for your vehicle and climate.
Official oil specifications for the 2017 Rogue SV
The following guidelines reflect the factory recommendations for this model and engine:
- Oil viscosity: 0W-20
- Oil type: Full synthetic recommended
- API/ILSAC rating: API SN or newer; ILSAC GF-5 or newer
- Oil capacity: Approximately 4.8 quarts (4.5 liters) with filter
- Brand guidance: Nissan Genuine Oil or equivalent meeting the above specs
Adhering to these specifications helps ensure proper lubrication, protection, and compliance with your vehicle’s warranty. When in doubt, verify with the owner's manual or a certified Nissan technician.
Maintenance notes and practical tips
Oil changes should follow the schedule in your owner's manual, with driving conditions influencing interval length. Use the recommended 0W-20 full synthetic oil and the appropriate filter to maintain engine performance and longevity. If you live in extreme climates or engage in heavy-duty use, consult your dealer for any climate-specific recommendations.
Climate considerations
In very hot or cold environments, sticking to the manufacturer’s specified 0W-20 full-synthetic oil is important. Some regions may have approved alternatives or additional guidelines, but any deviation should be confirmed with Nissan documentation or a dealer.
Summary: The 2017 Nissan Rogue SV requires 0W-20 full-synthetic engine oil, meeting API SN or newer and ILSAC GF-5 standards, with an approximate capacity of 4.8 quarts (4.5 L) including the filter. Always refer to the owner’s manual for the exact spec and maintenance intervals.