The 2016 Mazda CX-5 requires synthetic SAE 0W-20 engine oil. Use Mazda Genuine 0W-20 or an equivalent that meets ILSAC GF-5 and API SN specifications.
In this article, we detail the specific oil grade recommended for the 2016 CX-5, the engine variants available that year, and practical notes on capacity and maintenance to help you keep the engine properly lubricated.
Oil specification and grade
Key specifications to keep in mind when selecting oil:
- Oil grade: SAE 0W-20 synthetic. This viscosity supports fuel economy and cold-start performance in common driving conditions.
- Certification: Oil should meet ILSAC GF-5 or API SN specifications (or newer equivalents) compatible with Mazda SKYACTIV-G engines.
- Recommended oils: Mazda Genuine 0W-20 or any high-quality full-synthetic oil that meets the above specifications.
Following these specifications helps ensure proper lubrication, engine reliability, and compliance with warranty requirements for the 2016 CX-5.
Oil capacity and maintenance considerations
Knowledge of capacity and how maintenance is determined helps you plan oil changes more accurately:
- Oil capacity: Approximately 4.8 quarts (about 4.5 liters) of oil when replacing the filter.
- Maintenance timing: Rely on Mazda's oil-life monitoring system or the owner's manual to determine when to change the oil, as interval timing varies with driving conditions.
Using the correct amount of oil and following the maintenance indicators will help preserve engine health and performance in the CX-5.
Summary
For a 2016 Mazda CX-5, use synthetic 0W-20 oil that meets ILSAC GF-5/API SN specifications, with a typical capacity of 4.8 quarts (4.5 liters) including the filter. Opt for Mazda Genuine 0W-20 or an equivalent, and follow the vehicle's oil-life monitor or manual guidelines to determine replacement intervals.