The 2014 Honda CR-V typically uses 0W-20 full-synthetic motor oil. If 0W-20 isn’t available, 5W-20 can be used as a temporary substitute, but 0W-20 is the preferred grade. The engine’s oil capacity is roughly 4 quarts (about 3.8 liters) with a filter.
In more detail, the 2014 CR-V sits on a 2.4L i-VTEC engine that Honda designed for efficiency and reliability. Automakers specify a specific viscosity and approved oil types to protect the engine under varying temperatures and driving conditions. Honda’s manuals and service guides for this model consistently call for a 0W-20 viscosity and oils that meet API SN or higher and ILSAC GF-5 or newer specifications. While 0W-20 is the standard, some markets tolerate a short-term use of 5W-20 if 0W-20 isn’t readily available. Always verify with the owner’s manual or a Honda dealer for your region’s exact guidance.
Oil specifications for the 2014 CR-V
Before selecting oil, it’s helpful to know the official guidance the car expects in terms of viscosity, standards, and compatibility. The notes below summarize what to look for when shopping for oil for this vehicle.
- 0W-20 full synthetic motor oil (preferred) for normal driving in most climates
- 5W-20 can be used as a temporary substitute if 0W-20 is unavailable
- Avoid thicker grades (e.g., 5W-30, 10W-30) as a routine replacement unless specified by Honda for extreme conditions
- Oil must meet API SN or newer and ILSAC GF-5 or newer specifications
- Use a brand that meets these specs (Honda Genuine or equivalent that satisfies the API/GF requirements)
Choosing an oil that meets these specifications will help ensure proper lubrication, fuel efficiency, and engine protection for your CR-V.
Oil capacity and change intervals
The oil capacity with a filter is typically around 4 quarts (about 3.8 liters). For intervals, using 0W-20 synthetic oil usually supports longer change intervals (often about 7,500 miles or 12 months, whichever comes first) under normal driving; if you use conventional oil or drive in severe conditions, a 5,000-mile (8,000 km) interval or sooner is common. Always follow the maintenance minder system and your owner's manual for the exact interval applicable to your vehicle and region.
Tip: Always check the dipstick after an oil change and ensure the level is within the proper range. If you’re unsure about the exact capacity for your exact VIN or local climate, consult your Honda dealer or the official manual for precise figures.
Summary
For a 2014 Honda CR-V, the recommended oil is 0W-20 full synthetic, with 5W-20 as a temporary fallback if needed. Expect an oil capacity of around 4 quarts with a filter, and follow the maintenance minder system or your manual to determine the right change interval. Using the correct viscosity and API/GF specifications protects the engine and preserves efficiency over time.