The 2014 Honda CR-V uses 0W-20 synthetic engine oil for the 2.4-liter engine.
To understand why and how to choose the right oil, it helps to know the official specifications Honda expects for this model, including viscosity, oil type, and performance standards. The following sections break down the key requirements and practical guidance for maintaining your CR-V’s engine properly.
Recommended oil specifications
The 2014 CR-V’s 2.4L engine is designed to run on a 0W-20 viscosity oil that meets industry standards for modern engines. The oil should be suitable for energy-conserving engines and meet at least API SN or newer, with ILSAC GF-5 (or newer) certification. You may use either full synthetic or synthetic-blend oil, but synthetic oils are preferred for longer service life and better protection in varied climates.
- Viscosity: 0W-20
- Type: Synthetic motor oil (full synthetic or synthetic blend acceptable)
- Standards: API SN or newer; ILSAC GF-5 or newer
In short, choose a 0W-20 synthetic oil that meets API SN/ILSAC GF-5 or newer, and prefer a full synthetic when possible. Always verify the label and consult your owner's manual if you have climate-specific questions.
Oil capacity and change intervals
Knowing how much oil your engine holds and when to change it helps ensure you maintain proper lubrication. The following quick reference applies to the 2014 CR-V with the 2.4L engine.
- Oil capacity (with filter): approximately 4.5 quarts (about 4.3 liters)
- Change interval (normal driving): typically every 7,500 miles (12,000 km) or 12 months, whichever comes first
- Change interval (severe driving): more frequent changes, commonly around 3,750 miles (6,000 km) or 6 months
After adding or replacing oil, run the engine briefly, then check the level with the dipstick and top off to the full mark if needed. Refer to the owner's manual for any climate or usage exceptions.
Choosing a brand and ensuring compatibility
While Honda-published guidelines allow any reputable brand that meets the specified standards, many owners opt for Honda Genuine Motor Oil or other brand-name synthetics that explicitly meet API SN and ILSAC GF-5 with a 0W-20 rating. Always read the product label to confirm the viscosity (0W-20) and the appropriate certifications.
- Brand choice: Honda Genuine Motor Oil or any reputable synthetic that meets API SN and ILSAC GF-5, 0W-20
- Label checks: verify 0W-20 viscosity and certifications (GF-5 or newer, SN or newer)
- Warranty and compatibility: avoid viscosities outside the recommended range, which can affect performance and warranty coverage
With the right oil selected, you can help ensure smooth operation, good fuel economy, and reliable cold-start performance for your 2014 CR-V.
Summary
For a 2014 Honda CR-V, use 0W-20 synthetic engine oil that meets API SN or newer and ILSAC GF-5 or newer. You can use either full synthetic or synthetic blend, with a typical capacity of about 4.5 quarts (with a filter) and standard change intervals of 7,500 miles under normal conditions. Always check the owner’s manual for any climate-specific guidance and confirm the correct viscosity on the oil bottle before purchasing. Regular oil changes and level checks help maintain engine health and efficiency.