The Honda Fit 2010 uses a standard 12-volt lead-acid car battery, with the most common replacement being a Group 35 size and roughly 300–380 cold-cranking amps depending on the brand and climate.
Battery specifications for the 2010 Honda Fit
Below is a concise reference of the main specs and typical replacement options you’ll encounter when shopping for a battery for this model.
- Group size: 35 — the standard replacement size for most 2010 Fits.
- Battery type: 12-volt flooded lead-acid (vented); most OEM and aftermarket batteries for this car are this type.
- Cold-cranking amps (CCA): typically about 320–360 A for a standard replacement; higher CCA options are available for colder climates or high-performance brands.
- Reserve capacity (RC): commonly around 90–100 minutes.
In short, for a 2010 Honda Fit you’ll look for Group 35, a 12V flooded battery with roughly 320–360 CCA and about 90–100 minutes of reserve capacity. AGM or higher-CCA options exist from some brands, but the standard Fit spec is a conventional flooded battery.
Replacement considerations
When selecting a battery, climate, driving patterns, and warranty matter. It’s wise to match or exceed the OEM specifications to ensure reliable starting and electrical performance.
OEM vs aftermarket considerations
OEM Honda batteries are designed to fit the vehicle exactly and meet Honda’s specifications, while aftermarket Group 35 batteries can offer higher CCA ratings or warranties. Always verify fitment, terminal layout, and hold-down compatibility before purchasing.
Summary
The 2010 Honda Fit generally uses a 12-volt flooded lead-acid battery in Group 35, with typical CCA in the mid-300s and a reserve capacity around 90–100 minutes. When replacing, you can opt for OEM or reputable aftermarket options, and consider climate needs and warranty terms to choose the best fit for your vehicle.